manualshive.com logo in svg

Pioneer WYT Inverter Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
Pioneer WYT Inverter Series Скачать руководство пользователя страница 22

Indoor Unit Installation Location Selection

Follow the below best practices for selecting an optimal space for installation the indoor unit:

• 

DO NOT

 install the unit on a wall that is subject to vibrations.

• 

DO NOT 

install the system near sources of heat, steam, or flammable gases.

• 

DO NOT

 install the indoor unit in a location that is exposed to direct sunlight.

• 

DO

 ensure that the inlet and outlet vents are not obstructed. The system should be able to 

   output air all over the entire room.

• 

DO

 minimize the distance between the indoor and outdoor unit and install the unit in a   

  

  

place where connecting the indoor and outdoor unit will be as simple as possible.

• 

DO

 install the unit on a strong wall and where it is easy to drain the condensate water.

• 

DO

 install the unit in a location where it will be easy to service the machine and perform 

   

 

any necessary maintenance.

• 

DO

 obey the following tolerances depicted in the illustration below:

 Page 22

6

Indoor Unit Installation Instructions

Indoor Unit Installation

10-15 cm (4-6in)

or more

2.0 m (80 in) or more

10-15 cm (4-6 in)

or more

10-15 cm (4-6 in) or more

Содержание WYT Inverter Series















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды