Depending on the system, the control type (Cooling Only or Heat Pump) must be set after a
battery swap is done. As soon as the batteries are inserted, the symbols and will begin
flashing. Operate as below:
• When the symbol is displayed, push any button to set the control type to Cooling Only.
• When the symbol is displayed, push any button to set the control type to Heat Pump.
The temperature display can be set to show degrees in either °C or °F by doing the following:
1. Press and hold the TURBO button for 5+ seconds to activate the change prompt.
2. Repeat this process once more to switch between °C and °F options.
3. Release the button, and the setting will be active after 5 seconds have elapsed.
Operating the Remote Controller Successfully and Safely
• Ensure no objects come between the remote controller and signal
receptor of indoor unit.
• Keep the remote at least 3 ft away from televisions and other
electrical appliances.
• Always direct the remote controller toward the air conditioner.
• Don’t leave the remote exposed to sunrays.
Page 11
4
Operating Instructions
Owner’s
Manual
Replacement of Batteries
Remove the battery cover from the rear of the remote controller, by sliding it downward in
the direction of the arrow as depicted below. Install batteries according to the depicted
directions (+ and -) as shown on the remote controller. The cover then slides back into place.
Configuring Remote Controller Settings (some models)
Use 2x AAA batteries. Do not use re-chargeable batteries. Replace old batteries with new ones of the same type when the
display is no longer legible. Do not dispose of batteries as unsorted municipal waste. Disposal of such waste separately
for special treatment is necessary. If the system will not be used for a long time, remove batteries to prevent leakage.
Note: If the remote control is used to set the control type to Cooling Only, the heating function cannot be activated in
systems with a heat pump. To modify or reset this setting, first remove the batteries and then reinstall and repeat.
Note
Please remove batteries to avoid
leakage damage when not
being used for a long time.
+
+
Signal
receptor
D
ISP
L
AY
3D
HE
AL
TH
Y
ON/
OF
F
SW
IN
G
FA
N
TIM
ER
SU
PE
R
SL
EE
P
M
O
D
E
EC
O
CL
O
C
K
