The System Setup menu
07
39
En
Chapter 7:
The System Setup menu
Making receiver settings from the
System Setup menu
The following section shows you how to make detailed
settings to specify how you’re using the receiver (for
example, if you want to set up two speaker systems in
separate rooms), and also explains how to fine-tune
individual speaker system settings to your liking.
1
Switch on the receiver and your TV.
Use the
RECEIVER
button to switch on.
1
• If headphones are connected to the receiver,
disconnect them.
2
Press RECEIVER on the remote control, then press
the SETUP.
2
An on-screen display (OSD) appears on your TV. Use
/
//
and
ENTER
to navigate through the screens
and select menu items. Press
RETURN
to confirm and
exit the current menu.
• Press
SETUP
at any time to exit the System Setup
menu.
3
Select the setting you want to adjust.
•
Auto MCACC
– See
Automatically setting up for
surround sound (Auto MCACC)
on page 10 for a quick
and effective automatic surround setup. See
Automatic MCACC (Expert)
below for a more detailed
setup.
•
Surround Back System
– Specifies how you are
using your surround back speakers (see
Surround
back speaker setting
on page 42).
•
Manual MCACC
– Fine tunes your speaker settings
and customize the Acoustic Calibration EQ (see
Manual MCACC setup
on page 42).
•
Data Management
– Checks your MCACC presets
and manages them through copying, renaming or
deleting (see
Data Management
on page 47).
•
Manual SP Setup
– Specifies the size, number,
distance and overall balance of the speakers you’ve
connected (see
Manual speaker setup
on page 49).
•
Input Setup
– Specifies what you’ve connected to
the digital, HDMI and component video inputs (see
The Input Setup menu
on page 70).
•
Other Setup
– Makes customized settings to reflect
how you are using the receiver (see
The Other Setup
menu
on page 71).
Automatic MCACC (Expert)
If your setup requires more detailed settings than those
provided in
Automatically setting up for surround sound
(Auto MCACC)
on page 10, you can customize your setup
options below. You can calibrate your system differently
for up to six different MCACC presets
3
, which are useful
if you have different listening positions depending on the
type of source (for example, watching movies from a sofa,
or playing a video game close to the TV).
4
Important
• Make sure the microphone/speakers are not moved
during the Auto MCACC Setup.
• Using the Auto MCACC Setup will overwrite any
existing settings for the MCACC preset you select.
5
• The screen saver will automatically appear after three
minutes of inactivity.
Caution
• The test tones used in the Auto MCACC Setup are
output at high volume.
Note
1 Make sure not to switch off the power when using the System Setup menu.
2 • Note that when editing items in the
Manual MCACC
menu, you will need to first specify the MCACC preset you want to adjust by pressing
MCACC
before pressing
SETUP
.
• You can’t use the System Setup menu when the
iPod USB
,
XM
or
SIRIUS
Radio input source is selected (in either the main or sub zone). When you
set
ZONE 2
to
ON
(page 63), you can’t use the System Setup menu.
DVD
BD
TV
HDMI
DVR 1
DVR 2
CD
XM
SIRIUS
CD-R
FM/AM
iPod USB
RECEIVER
SOURCE
RECEIVER
MENU
T.EDIT
TOP MENU
RETURN
iPod CTRL
SETUP
EXIT
TOOLS
CATEGORY
PARAMETER
ENTER
TUNE
ST
ST
TUNE
PARAMETER
ENTER
RETURN
SETUP
TV CTRL
MAIN
ZONE 2
AUDIO
DISPLAY
CH
RECEIVER
MEM
RECEIVER
System Setup MENU
:Exit
1 . Auto MCACC
2 . Surround Back System
3 . Manual MCACC
4 . Data Management
5 . Manual SP Setup
6 . Input Setup
7 . Other Setup
3 These are stored in memory and referred to as
MEMORY1
–
6
(or
M1
–
6
) until you rename them in
Data Management
on page 47.
4 You may also want to have separate calibration settings for the same listening position, depending on how you’re using your system.
5 Except in cases where you are only adjusting one parameter (i.e. channel level) from the
CUSTOM
setup screen (step 2).
VSX-03TXH_KU.book 39 ページ ２００８年４月１６日 水曜日 午後１時１９分
