75
VSX-D810S
Display
1
SIGNAL SELECT indicators
Light to indicate the type of input signal assigned for the
current component (see “Front Panel“,
0
SIGNAL
SELECT). When the AUTO setting is being used on the
VSX-D810S receiver a set of brackets will appear around
the SIGNAL SELECT indicators.
2
DIGITAL
: Lights when a Dolby Digital signal is played.
DTS
: Lights when a source with DTS audio signals is
played.
ANALOG
: Lights when an analog signal is selected.
DIGITAL : Lights when a digital audio signal is selected.
[ ]: Lights when the AUTO setting is selected.
2
DTS indicator
Lights when DTS mode is being used.
3
2
DIGITAL indicator
When the
2
(DOLBY)/DTS mode of the receiver is on,
this lights to indicate playback of a Dolby Digital signal.
However,
2
PRO LOGIC
lights during two channel
playback of Dolby Digital.
4
Surround Back indicator
Lights when most Surround Back channel flag encoded
(6.1channel) software is playing. (With some Surround
Back channel software the surround back indicator won’t
light because there is no flag encoded in the software.) If
you play DTS 5.1/6.1 channel software surround sound will
be heard whether it is encoded with a surround back
channel flag or not.
5
OVERLOAD indicator
This lights when an analog signal is too high (the
SIGNAL SELECT would have to be on ANALOG). It
indicates the sound is distorting and the input signal
should be reduced.
6
ATT indicator
Lights when ATT is used to attenuate (reduce) the level
of the input signal (can only be used in ANALOG mode).
7
DIRECT indicator
Lights when source DIRECT is in use. This function
bypasses all tone, balance, DSP and Dolby Surround
effects.
8
SPEAKER indicator
Shows if the speaker system is on or not. SP
3
A means
that speakers are switched on. SP
3
means that
speakers are switched off.
9
MONITOR indicator
Lights when
MONITOR
is selected. Used to hear a
recording as it's being made.
0
RF ATT indicator
Lights when the
RF ATT
is on.
-
EON indicator
The box around
EON
indicator lights to inform you that
the currently tuned station carries the EON data service.
When the EON mode is set, the
EON
indicator light’s, but
during actual reception of an EON broadcast the
EON
indicator will flash. An empty box in the
EON
indicator
spot means it is possible to pick up an EON broadcast
but the receiver has not been set to do so (this will only
appear when RDS is switched on).
=
RDS indicator
Lights when an RDS broadcast is received.
~
CHARACTER display
Shows the radio frequency or function (DVD/LD, CD, etc.)
receiver is using .
!
2
PRO LOGIC indicator
When the
2
/DTS mode of the receiver is on, this lights
to indicate playback of a two channel source.
@
DNR indicator
Lights when the digital noise reduction is on. Use to
reduce extraneous noise. It can be used with any sound
mode.
#
DSP indicator
Lights when any “Advanced Theater” or “DSP” mode is
selected.
$
MIDNIGHT indicator
Lights when MIDNIGHT listening mode is in use.
%
LOUDNESS indicator
Lights when the LOUDNESS is on. Use to boost the bass
and treble at low volume.
^
TUNER indicators
MONO
:
Lights when the mono mode is set using the
MPX
button.
TUNED
:
Lights when a broadcast is being received.
STEREO
:
Lights when a stereo FM broadcast is being received in
auto stereo mode.
&
MASTER VOLUME LEVEL
Shows the overall volume level. Volume level is
maintained even when the power is off. ---
dB
indicates
the minimum level, and
0dB
indicates the maximum level.
dB
SIGNAL SELECT
MIDNIGHT
LOUDNESS
DIRECT
MONITOR
TUNED
MONO
ANALOG DIGITAL
SP A
DIGITAL DTS
DIGITAL
PRO LOGIC
SB
ATT
DSP
DNR
RF ATT
EON
STEREO RDS
1
2
3
4
5 6
7
8
9
0
- =
~
&
!
# $
@
%
^
Содержание VSX-D810S
