Pioneer VSX-D810S, Руководство по обслуживанию

Страница: 73 / 78

73
VSX-D810S
1
N∫m
-
Û˘,?∫
# $ % ^ & *
( ) !
@
1
2 3 4 5
7
8 6
9
~ = 0 -
8.1 PANEL FACILITIES
8. PANEL FACILITIES AND SPECIFICATIONS
Front Panel
1
STANDBY indicator
Lights when the receiver is in standby mode (note that
the receiver consumes a small amount of power (1W) in
standby mode).
2
—
OFF/
_
ON (Main power) button
If the button is OFF (
—
), the power of the receiver is shut
off and the
STANDBY/ON
button on the receiver or the
RECEIVER
button on the remote control do not
function. Pressing the button again will turn the receiver
ON (
_
) and the receiver enters the standby mode. In the
standby mode, you can turn on the receiver using
STANDBY/ON
button on the receiver or the
RECEIVER
button on the remote control.
STANDBY/ON button
Switches the receiver between on and standby (note that
the receiver consumes a small amount of power (1W) in
standby mode).
3
STATION (+/–) buttons
Selects station memories when using the tuner.
4
TUNING (+/–) buttons
Selects the frequency when using the tuner.
5
DIRECT button
Use to switch DIRECT playback on or off. This mode
bypasses the tone controls, channel levels,
2 /DTS and
DSP modes for the most accurate reproduction of a
program source.
6
MONITOR button
Press to switch tape monitoring on/off.
7
DIGITAL NR button
Switches the DIGITAL NR on or off. To reduce
extraneous noise switch on DIGITAL NR.
8
DSP MODE button
Use to switch between the various DSP modes available
(
HALL1, HALL 2, JAZZ, DANCE, THEATER1, THEATER 2, 5/
6CH STEREO
) and
DSP off
. Use this button to create
different surround sound effects from any stereo source.
9
Remote sensor
Receives the signals from the remote control.
0
SIGNAL SELECT button
Use to select an analog or digital or AUTO signal.
- 2
/DTS button
Use to switch between the various 2 /DTS surround
modes.
=
TONE button
This button allows you to activate the BASS & TREBLE
controls. To adjust the BASS and/or TREBLE use the
MULTI JOG dial. Tone can only be used in 2 channel
stereo sound mode. The tone controls have no effect on
the B speaker system.
~
MULTI JOG dial
You can use this dial for two purposes. Firstly, in normal
mode turn it to select a source component. Secondly, use
it to adjust the BASS and/or TREBLE levels when the
TONE button has been activated (as explained above).
!
MASTER VOLUME
Use to set the overall listening volume.
@
VIDEO INPUT jacks
Connect a video camera, video game system, etc. to the
VIDEO INPUT
jacks.
#
MIDNIGHT button
Use when listening to movie soundtracks at low volume.
This feature will enable you to hear quiet sounds and not
get jolted by loud or sudden sound effects.