Additional information
11
44
En
No sound from surround back
speaker.
• Surround back speaker is switched off.
• Set the surround back speaker to
S.BACK S
or
S.BACK L
(See page 34).
• The surround back channel is off
• Set the surround back channel to
SB AUTO
or
SB ON
(see page 29).
No sound from subwoofer.
• The subwoofer is disconnected or switched
off.
• Connect or switch on the subwoofer (see page 15).
• The subwoofer's settings are incorrect.
• Set the subwoofer (see page 35).
• Set the front speakers to Small (
S
) (see page 34).
• The subwoofer's levels are too low.
• See
Setting individual channel levels
on page 37 to check
the speaker levels.
• The LFE Attenuator is set to
OFF
.
• Set the LFE Attenuator to either
0 dB
or
10 dB
(see
page 35).
No sound output from one
speaker.
• The speaker system setting is switched off.
• The speaker isn't connected properly.
• The source has no sound output for that
channel.
• The speaker output level is set too small.
• Change the speaker setting to Large (
L
) or Small (
S
) (see
page 34).
• Check all connections.
• If you choose one of the Advanced Surround mode, an
extra channel may be created for the speaker (see
page 28).
• Increase the speaker output level.
Noise is output when scanning a
DTS CD.
• The scan function performed by the player
slightly alters the digital information, making
it unreadable.
• This is not a malfunction, but be sure to turn the volume
down to prevent the output of loud noise from your
speakers.
The Dolby/DTS indicator doesn't
light when playing Dolby/DTS
software.
• The player is paused.
• Press play.
• The player’s sound output settings are
wrong.
• Set the player correctly (consult the manual that came
with the player, if necessary).
When playing a 96 kHz/24bit disc
the sound is too loud.
• Different discs have different recording
levels so some may be louder than others.
• Turn the volume down.
The sound distorts.
• The analog signal is too strong.
• Turn on input attenuator (see page 36).
• Master volume is too loud.
• Turn the volume down.
You can only hear treble from
speakers.
• The front speakers are set to small (
S
).
• Set the front speakers to large (
L
) (see page 34).
Sound is produced from analog
components, but not from digital
ones (DVD, LD, CD-ROM etc.).
• Digital connections are incorrect.
• Make digital connections (see page 8)
• The digital output of the player is turned off. • Turn on the digital output of the player on (consult the
manual that came with the player, if necessary).
• The CD-ROM player is outputting a data
stream (not an audio signal) which is
incompatible with this receiver.
• Use a player that is compatible with this receiver.
• Analog input has been selected.
• Select digital input (see page 32).
• The digital input assignment is wrong.
• Assign the digital input (see page 36).
No sound is output or a noise is
output when Dolby Digital/DTS
software is played back.
• A DVD player not compatible with Dolby
Digital/DTS is being used.
• Make sure your DVD player is compatible with Dolby
Digital/DTS.
• The settings on the DVD player are incorrect
and/or the DTS signal output is turned off.
• Make sure the player’s settings are correct and/or the
DTS signal out is on. Refer to the instruction manual
supplied with the DVD player.
• The digital output level is turned down on a
CD player or other component equipped with
digital output level adjustment capability. (The
DTS signal has been altered by the player, and
cannot be read.)
• Set the digital volume level of the player to full, or to the
neutral position.
No image is output when an
input is selected.
• The video connections are incorrect.
• Make sure the video component is connected correctly
(see page 13).
• The input source is not properly selected.
• Make sure the proper component is selected by
pressing the correct function button (see page 26).
• The DVD/video player settings are incorrect. • Set correctly. Refer to the instruction manual supplied
with the DVD/video player.
The settings have all been
cleared.
• The receiver has been unplugged or the
main power turned off for more than a month.
• Set the receiver again (see page 34).
Symptom
Cause
Remedy
vsx-c501(WY).book 44 ページ ２００４年５月２８日 金曜日 午後３時１９分
