Controlling other equipment
10
35
En
English
6
TV CONTROL buttons
Dedicated buttons for controlling your TV.
Recalling preset codes
The following steps show you how to recall preset codes
for each input and for the
TV CONTROL
buttons.
1
Press RECEIVER and number button ‘1’ at the
same time.
The LED starts blinking.
• To cancel the preset mode at any time press
RECEIVER
.
• The remote control will also return to the previous
mode after one minute of inactivity.
2
Press the input select button you want to preset.
Select
DVD
,
DVR/VCR
,
FRONT
, or
TV/SAT
.
• To preset the
TV CONTROL
buttons, press
TV
CONTROL
.
The LED stops blinking and remains lit.
3
Use the number buttons to enter a 3 digit setup
code.
See
Preset code list
on page 38 for a list of all the codes of
different types of equipment.
The LED starts blinking again.
After entering a code, a power on/off command is
transmitted by the remote. If the component you want to
control can be switched on/off by remote, it should now
switch on/off.
If the other component fails to switch on/off, try another
preset code if there is one available.
4
Repeat process to assign preset codes for as
many components as you want.
Note
• See
Preset code list
on page 38 for the components
and manufacturers available.
• The preset codes cover a wide variety of equipment,
however, there may be some models from a
particular manufacturer that do not work with any of
the available codes.
• With some components, not all functions are
controllable by this remote.
• Refer to
VCR / DVD / LD player and DVD recorder
controls
on page 36 and
Cable TV / satellite TV / digital
TV / TV controls
on page 37 for detailed information on
the function of individual buttons.
Resetting all remote control settings
This restores all presets to the factory defaults. See
Using
the remote control with other components
on page 34 for
the default remote settings.
•
Press RECEIVER and number button ‘0’ (zero) at
the same time. Keep them pressed for about 3
seconds.
The LED on the remote control blinks three times
indicating all the preset codes and the Remote Direct
setting have been reset to the factory defaults.
RECEIVER
RECEIVER
DVD
TV/SAT
FRONT
FM/AM
DVR/VCR
TV CONTROL
vsx-c302_FL.book 35 ページ ２００４年５月１０日 月曜日 午後５時８分
