Other Settings
09
59
En
The Other Setup menu
The Other Setup menu is where you can make
customized settings to reflect how you are using the
receiver.
1
Press
RECEIVER
on the remote control, then press
the
SETUP
button.
An on-screen display (OSD) appears on your TV. Use the
///
buttons and
ENTER
to navigate through the
screens and select menu items. Press
RETURN
to
confirm and exit the current menu.
2
Select ‘Other Setup’ then press
ENTER
.
3
Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
•
Multi Room Setup
– Specify your volume setting for
a multi-room setup and your IR receiver type (see
Multi-Room and IR receiver setup
below).
•
SR+ Setup
– Specify how you want to control your
Pioneer plasma display (see
Multi-Room and IR
receiver setup
below).
•
OSD Adjustment
– Adjust the position of the on-
screen display on your TV (see
OSD Adjustment
below).
4
Make the adjustments necessary for each setting,
pressing RETURN to confirm after each screen.
Multi-Room and IR receiver setup
• Default setting:
Variable
/
Setting 1
If you’ve made multi-room connections (see
Multi-room
listening
on page 53) you may need to specify your
volume setting. Also use this menu to specify your IR
receiver type (if necessary).
1
Select ‘Multi-Room’ from the System Setup
menu.
2
Select the volume level setting.
1
•
Variable
– Use this setting if you’ve connected a
power amplifier in the sub room (this receiver is
simply being used as a pre-amp) and you will be
using this receiver’s controls to adjust the volume.
•
Fixed
– Use this setting if you’ve connected a fully
integrated amplifier (such as another Pioneer VSX
receiver) in the sub room and want to use that
receiver’s volume controls. (This setting is not
available if the surround back system setting is set to
MR & S
.)
With the
Fixed
setting, the source is sent from this
receiver at maximum volume, so make sure the volume is
quite low in the sub room at first and then experiment to
find the correct level.
3
Select the type of IR receiver you’re using.
•
Setting 1
– Default setting.
•
Setting 2
– Use this setting if the IR receiver you’re
using doesn’t seem to work with
Setting 1
.
2
4
When you're finished, press RETURN.
You will return to the Other Setup menu.
SR+ Setup for Pioneer plasma displays
Make the following settings if you have connected a
Pioneer plasma display to this receiver using an SR+
cable. Note that the number of function settings available
will depend on the plasma display you’ve connected.
See also
Using this receiver with a Pioneer plasma display
on page 55 and
Using the SR+ mode with a Pioneer
plasma display
on page 56.
VIDEO/GAME
(Fixed)
(Fixed)
HDMI 1
HDMI 2
XM
CD
OPT 3
CD-R/TAPE/MD
TUNER
MULTI CH IN
iPod
Input source
Input Terminals
Digital
Component
System Setup
1.Auto MCACC
2.Surr Back System
3.Manual MCACC
4.Data Management
5.Manual SP Setup
6.Input Setup
7.Other Setup
: Exit
7.Other Setup
:Return
a.Multi Room Setup
b.SR+ Setup
b.OSD Adjustment
Note
1 If you selected
MR&S
in the
Surround back speaker setting
on page 35, you won’t be able to change the volume level.
2 • Some IR receivers may not work with this receiver. Check with your audio dealer for more information.
• If the IR receiver setting is incorrect, SR control won’t be possible with this receiver.
7.Other Setup
:Return
a.Multi Room Setup
b.SR+ Setup
b.OSD Adjustment
7a.Multi Room Setup
:Finish
Volume Level
Variable
IR Setting
[ Setting 1 ]
Be careful of loud
volume when "FIXED"
is selected.
VSX-9110TXV_KU.book.fm 59 ページ ２００６年４月４日 火曜日 午後５時１５分
