Pioneer VSX-817-K, Руководство по обслуживанию

Страница: 137 / 140

VSX-917V-K
137
5 6 7 8
5 6
7
8
C
D
F
A
B
E
1 SIGNAL indicators
Lights to indicate the type of input signal:
AUTO - Lights when AUTO signal select is
on.
SB - Depending on the source, this lights
when a signal with surround back channel
encoding is detected.
6
6
0
L
C
R
Ls
Rs
[ ]
[ ]
[ ]
[ ]
[ ]
SB
SB
[ ]
R
40 125 250 4K13K
L
[ ]
1 2 3 4 5 6 7 11 8 9 10
12 16 15 17 18 13 14 19 20 21
DIGITAL - Lights when a digital audio signal
is detected.
2
DI DIGITAL - Lights when a Dolby Digital
encoded signal is detected.
ANALOG - Lights when an analog signal is
detected.
DTS - Lights when a source with DTS
encoded audio signals is detected.
2
Lights to indicate decoding of a DTS
multichannel signal.
3
2
DI DIGITAL
Lights to indicate decoding of a Dolby Digital
multichannel signal.
4
2
PRO LOGIC IIx
2
PRO LOGIC II lights to indicate Pro Logic II
decoding.
2
PRO LOGIC IIx lights to indicate
Pro Logic IIx decoding (see Listening in
surround sound ).
5 VIR.SB
Lights during Virtual surround back processing.
6 DIRECT
Lights when source Stream Direct playback is in
use. Direct playback bypasses the tone controls
for the most accurate reproduction of a source.
7 AUTO SURR.
Lights when Auto Surround (see Auto playback)
or XM HD Surround is on.
8 ATT
Lights when ANALOG ATT is used to
attenuate (reduce) the level of the analog input
signal.
9 SLEEP
Lights when the sleep mode is active
(see Remote control below).
10 Tuner indicators
- Lights when the mono mode is set
using the
MPX button.
- Lights when a stereo FM broadcast is
being received in auto stereo mode.
- Lights when a broadcast is being
received.
11 Speaker indicators
Lights to indicate the current speaker system,
A and/or B .
12 Character display
13 Neo:6
Lights to indicate Neo:6 processing.
14 ADV.SURR. (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
15 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro signal.
16 MIDNIGHT
Lights during Midnight listening .
17 D.E.
Lights when Dialog Enhancement is switched on.
18 LOUDNESS
Lights during Loudness listening .
19 EX
Lights when a Dolby Digital Surround EX
encoded signal is detected.
20 Master volume level
Shows the overall volume level.
21 MCACC channel EQ / Sound Retriever
indicators
These indicators show the EQ balance for each
channel in Checking your Acoustic Calibration
EQ settings. Also,
L and R light when the Sound
Retriever is active.