Basic playback
19
En
English
Français
Italiano
Español
Nederlands
Deutsch
Refer to the Operating Instruction in CD-ROM for
instructions on how to connect and setup the
Bluetooth
ADAPTER and how to play music.
The
Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by PIONEER CORPORATION is under license. Other
trademarks and trade names are those of their respective
owners.
Listening to the radio
1
Press TUNER to select the tuner.
2
Use BAND to change the band (FM or AM), if necessary.
3
Tune to a station.
There are three ways to do this:
Automatic tuning
Press and hold
TUNE
/
for about a second. The
receiver will start searching for the next station.
Manual tuning
To change the frequency one step at a time, press
TUNE
/
.
High speed tuning
Press and hold
TUNE
/
for high speed tuning.
Release the button at the frequency you want.
Improving FM sound
If the
TUNE
or
ST
indicators don’t light when tuning to an FM
station because the signal is weak, set the receiver to the
mono reception mode.
Press BAND to select FM MONO.
Saving station presets
If you often listen to a particular radio station, it’s convenient
to have the receiver store the frequency for easy recall
whenever you want to listen to that station.
1
Tune to a station you want to memorize.
See
Listening to the radio
above for more on this.
2
Press TUNER EDIT.
The display shows
PRESET
, then a blinking
MEM
and station
preset.
3
Press PRESET
/
to select the station preset you
want.
4
Press ENTER.
The preset number stop blinking and the receiver stores the
station.
Listening to station presets
You will need to have some presets stored to do this. See
Saving station presets
above if you haven’t done this already.
Press PRESET
/
to select the station preset you
want.
© 2011 PIONEER CORPORATION.
All rights reserved.
VSX-521_SYXCN_QSG_En.book 19 ページ ２０１１年３月１日 火曜日 午前９時４４分
