Pioneer VSX-33TX, Руководство по эксплуатации

Страница: 47 / 84

47
OPERA
TION
Adjusting Bass and Treble
You can use BASS +/– or /– buttons to adjust the low and high frequencies for each individual set of
speakers. If the receiver is in STEREO mode you can only adjust the FRONT speakers. In a surround mode
(STANDARD, ADVANCED THEATER, etc.) you can adjust the FRONT, CENTER, SURROUND speakers. The
TONE button can also be used to bypass the tone circuitry (see p.22-23).
1 Press the TONE button on the front panel to
put the receiver in TONE ON mode.
2 Press the CHANNEL SELECT button on the
front panel to cycle through the different
tone adjust modes.
The button cycles though the possibilities in the following
order:
TONE Front TONE Center
TONE Surround
3 Use the BASS or TREBLE (+/–) buttons to
adjust the low or high frequencies of each
channel.
A few seconds after you finish adjusting the tone the receiver will
revert to the sound mode it was in at the beginning of the
process.
• The tone control can be adjusted in a range of ±6 dB.
• The tone control cannot be adjusted in THX or MULTI CH IN
modes.
• If you press TONE button in DIRECT mode, the receiver switch
to STEREO mode and “TONE ON” appears in the display.
Basic Playback
2
1 3
memo