Pioneer VSX-33TX, Руководство по эксплуатации

Страница: 14 / 84

14
Example Connection for a DVD/LD or LD player
Make sure you connect your DVD/LD or LD players using both a RF demodulator and either a coaxial or optical
digital connections. To connect a DVD/LD player or LD player with it's
2 (AC-3) RF output, a commercially available
RF demodulator (RFD-1) is required. The RF demodulator changes the RF signal to a digital signal which is then
processed by the VSX-33TX model through their digital input jacks. For more details, refer to the instruction manual
supplied with the RFD-1. If your player has an
2 RF output this will ensure you can use all LDs. We also
recommend hooking up your digital components to analog audio jacks.
Before making or changing the connections, switch off the power and disconnect the power cord from the AC
wall outlet.
*The arrows indicate the direction of the audio signal.
Connecting Your Equipment
memo
DVD/LD player
or LD player
RF demodulator RFD-1
1
2 3
DIGITAL OUT
(AC-3)(LD)
RF OUT
2
DIGITAL IN
PCM/
(OPT.) PCM/
RF IN
(AC-3)(LD)
DIGITAL OUT
PCM/
(OPT.) PCM/
OPTICAL COAXIAL
DIGITAL IN
STEREO
L
R
ANALOG
VIDEO
OUT
VIDEO
S-VIDEO
Be sure to make either a digital coaxial or digital optical connection (pictured as DIGITAL jack 1 or DIGITAL jack 3
in this diagram) as well, but you don't need to make both.
Also, be sure to assign the jacks to the proper component(s) with the Digital Input Select procedure (see p.29) if
necessary. See the explanation on p.13 for details.
Make sure the RF demodulator digital in switch is set correctly (optical or coaxial depending on the connection).
(not a PCM-only output)