12
12
> Specifications
> Settings
> Listening Modes
> Playback Function
> Basic Manual
Troubleshooting
|
Appendix
•
Distance units can be switched by pressing MODE on the remote controller. When the unit is set as
feet, you can set between 0.1 ft and 30.0 ft in increments of 0.1ft. When the unit is set as meters, you
can set between 0.03 m and 9.00 m in increments of 0.03 m.
■
Channel Level
Setting Item
Default Value
Setting Details
Front Left
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Center
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Front Right
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Height Left
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
•
The setting cannot be changed if "Zone 2" is set
in "System Setup" - "Speaker" - "Configuration"
- "Zone Speaker" and Zone 2 is on.
Height Right
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
•
The setting cannot be changed if "Zone 2" is set
in "System Setup" - "Speaker" - "Configuration"
- "Zone Speaker" and Zone 2 is on.
Surround Right
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Содержание VSX-1131
Страница 31: ...31 ...
