Pioneer VSX-1131 Скачать руководство пользователя страница 63

Страница: 63 / 92

> Specifications

> Settings

> Listening Modes

> Playback Function

> Basic Manual

Troubleshooting

Appendix

System Setup

•

If "Firmware Update" is grayed out and cannot be

selected, wait for a while until it starts up.

•

You will not be able to select "Update via NET" if

there is nothing to update.

3. Press ENTER with "Update" selected to start update.

•

During the update, the TV screen may go black

depending on the updated program. In that case,

check the progress on the display of the unit. The

TV screen will remain black until the update is

complete and the power is turned on again.

•

"Completed!" is displayed when the update is

complete.

4. Press STANDBY/ON on the main unit to switch the

unit to standby. The process is completed and your

firmware is updated to the latest version.

•

Do not use on the remote controller.

■

If an Error Message is Displayed

When an error occurs, "

＊

＊＊

Error!" is displayed on

the display of the unit. ("

＊

" represents an alphanumeric

character.) Check the following:

Error Code

•

＊

-01,

＊

-10

：

Ethernet cable not found. Connect the Ethernet cable

properly.

•

＊

-02,

＊

-03,

＊

-04,

＊

-05,

＊

-06,

＊

-11,

＊

-13,

＊

-14,

＊

-16,

＊

-17,

＊

-18,

＊

-20,

＊

-21

：

Internet connection error. Check the following:

– The router is turned on

– This unit and the router are connected via the

network

Try to disconnect and then connect again the power

to the unit and router. This may solve the problem. If

you are still unable to connect to the Internet, the DNS

server or proxy server may be temporarily down. Check

the service status with your ISP provider.

• Others

Disconnect then reconnect the AC power cord, then

repeat from the beginning.

Updating via USB

Preparation

•

Prepare a 128MB or larger USB storage device. FAT16

or FAT32 file system format.

– Media inserted in a USB card reader may not be

used for this function.

– USB storage devices with security function are not

supported.

– USB hubs and USB devices with hub function are

not supported. Do not connect these devices to the

unit.

•

Delete any data stored on the USB storage device.

•

Turn off the controller component (PC etc.) connected

to the network.

•

Stop any playing Internet radio, USB storage device, or

server content.

•

If the multi-zone function is active, turn it off.

•

If "HDMI CEC" is set to "On", set it to "Off".

– Press on the remote controller to display the

Home screen. Next, select "System Setup" -

"Hardware" - "HDMI", press ENTER, select "HDMI

CEC" and select "Off".

＊

Some USB storage devices may take long to load, may not be loaded

correctly, or may not be correctly fed depending on the device or their

content.

＊

Our company will not be liable whatsoever for any loss or damage of

data, or storage failure arising from the use of the USB storage device

with this unit. Thank you for your understanding.

＊

The description may differ from the on-screen display but that will not

change the way to operate or the function.

■

Update

1. Connect the USB storage device to your PC.
2. Download the firmware file from our company's website

to your PC and unzip.

Firmware files are named in the following way:

PIOAVR

＊＊＊＊

＊＊＊＊＊＊＊＊＊＊＊＊

.zip

Unzip the file on your PC. The number of unzipped files

and folders varies depending on the model.

3. Copy all unzipped files and folders to the root folder of

the USB storage device.

Содержание VSX-1131





























































































Результаты поиска

Содержание VSX-1131

Отзывы:

Похожие инструкции для VSX-1131

Бренды по названию

Популярные бренды

Pioneer VSX-1131, Основное руководство

Результаты поиска

Содержание VSX-1131

Отзывы:

Похожие инструкции для VSX-1131

Бренды по названию

Популярные бренды