8
01
Before you start
Canceling the demo display
On this receiver, the demo mode is turned on by default. When the power is turned on, the demo display is set
and various indications are shown on the front panel display. To cancel the demo display, connect the power
cord, then perform the operation below.
!
The demo mode is canceled automatically when the
Full Auto MCACC
operation is performed.
1 Switch the receiver into standby.
2 While holding down ENTER on the front panel, press
u
STANDBY/ON.
The display shows
RESET
c
NO
d
.
3 Select ‘FL DEMO’ using TUNE
i
/
j
.
4 Use PRESET
k
/
l
to select FL DEMO
c
OFF
d
then press
u
STANDBY/ON on the front
panel.
About using AVNavigator (included CD-ROM)
The included AVNavigator CD-ROM contains
Wiring Navi
allowing you to easily make the receiver’s connections
and initial settings in dialog fashion. High precision initial settings can be completed easily simply by following
the instructions on the screen to make the connections and settings.
There are also other features enabling easy use of various functions, including an Interactive Manual that oper-
ates in association with the receiver, updating of various types of software, and MCACC Application that lets you
check the MCACC measurement results on 3D graphs.
Installing AVNavigator
1 Load the included CD-ROM into your computer’s CD drive.
The CD-ROM’s top menu screen appears.
2 Click ‘Install AVNavigator’ from the CD-ROM top menu.
3 Follow the instructions on the screen to install.
When “Finish” is selected, installation is completed.
4 Remove the included CD-ROM from the computer’s CD drive.
Handling the CD-ROM
Operating Environment
!
AVNavigator can be used with Microsoft
®
Windows
®
XP/Vista/7.
!
A browser is at times used for AVNavigator functions. The supported browser is Microsoft Internet Explorer 8
or 9.
!
Adobe
®
Flash
®
Player 10 must be installed to use some of the functions in AVNavigator.
For details, see http://www.adobe.com/downloads/.
Precautions For Use
!
This CD-ROM is for use with a personal computer. It cannot be used with a DVD player or music CD player.
Attempting to play this CD-ROM with a DVD player or music CD player can damage speakers or cause
impaired hearing due to the large volume.
License
!
Please agree to the “Terms of Use” indicated below before using this CD-ROM. Do not use if you are unwilling
to consent to the terms of its use.
Terms of Use
!
Copyright to data provided on this CD-ROM belongs to PIONEER CORPORATION. Unauthorized transfer,
duplication, broadcast, public transmission, translation, sales, lending or other such matters that go beyond
the scope of “personal use” or “citation” as defined by Copyright Law may be subject to punitive actions.
Permission to use this CD-ROM is granted under license by PIONEER CORPORATION.
General Disclaimer
!
PIONEER CORPORATION does not guarantee the operation of this CD-ROM with respect to personal com-
puters using any of the applicable OS. In addition, PIONEER CORPORATION is not liable for any damages
incurred as a result of use of this CD-ROM and is not responsible for any compensation. The names of private
corporations, products and other entities described herein are the registered trademarks or trademarks of their
respective firms.
Using AVNavigator
1 Click [AVNavigator 2012.I] on the desktop to launch AVNavigator.
AVNavigator is launched and
Wiring Navi
starts up. The language selection screen appears. Follow the instruc-
tions on the screen to make the connections and automatic settings.
Wiring Navi
only starts up automatically the first time AVNavigator is launched.
2 Select and use the desired function.
AVNavigator includes the following functions:
!
Wiring Navi
– Guides you through connections and initial settings in dialog fashion. High precision initial
settings can be made easily.
!
Operation Guide
– Describes the receiver’s playback operations and how to use several functions through
videos and illustrations.
!
Interactive Manual
– Automatically displays the pages explaining the functions that have been operated on
the receiver. It is also possible to operate the receiver from the Interactive Manual.
!
Glossary
– Displays glossary pages.
!
MCACC Appli
– Displays Advanced MCACC measurement results vividly on the computer.
There are special operating instructions for MCACC Application. These instructions are included in the
AVNavigator
Interactive Manual
’s menus. Refer to them when using MCACC Application.
!
Software Update
– Allows various types of software to be updated.
!
Settings
– Used to make various AVNavigator settings.
!
Detection
– Used to detect the receiver.
Deleting the AVNavigator
You can use the following method to uninstall (delete) the AVNavigator from your PC.
%
Delete from the Control Panel of the PC.
From the Start menu, click “Program”
d
“PIONEER CORPORATION”
d
“AVNavigator 2012.I”
d
“Uninstall
AVNavigator 2012.I”.
