Pioneer VSX-1015-K Скачать руководство пользователя

Страница: 52 / 78

Using the tuner

Searching for RDS programs

One of the most useful features of RDS is the ability to
search for a particular kind of radio program. You can
search for any of the program types listed on the previous
page.

Press the BAND button to select the FM band.

RDS is only possible in the FM band.

Press the PTY SEARCH button.

SEARCH

shows in the display.

Use the MULTI JOG dial to select the program

type you want to hear.

Press ENTER to search for the program type.

The system starts searching through the station presets
for a match. When it finds one, the search stops and the
station plays for five seconds.

If you want to keep listening to the station, press

ENTER within the 5 seconds.

If you don’t press

ENTER

, searching resumes.

NO PTY

is displayed it means the tuner couldn’t find

that program type at the time of the search.

Note

• RDS searches station presets only. If no stations

have been preset, or if the program type could not be
found among the station presets

NO PTY

displayed.

FINISH

means the search is complete.

Using EON

When EON (Enhanced Other Network information) is
turned on, the receiver jumps to an EON-linked
broadcast when it begins, even if a receiver function
other than the tuner is being used. It can’t be used in

areas that EON information isn’t transmitted and when
FM broadcast stations don’t transmit PTY data. When the
broadcast ends, the tuner returns to the original
frequency or function.

Press the BAND button to select the FM band.

EON is only possible in the FM band.

Press EON to select one of the possible modes.

Press repeatedly to switch between:

•

EON TA

(Traffic Announcement) – Sets the tuner to

pick up traffic information when it is broadcast.

•

EON NEWS

– Sets the tuner to pick up news when it

is broadcast.

•

OFF

– Switches off the EON feature.

When set to

NEWS

, the

EON

indicator in the

display lights (it flashes when receiving an EON
broadcast). The

indicator in the display lights when the

current station carries the EON service.

Note

• The EON function does not work when listening to

AM reception.

• You can’t search for traffic announcements and

news at the same time.

• You cannot operate the

TUNER EDIT

and

PTY

SEARCH

buttons while the

EON

indicator in the

display is lit.

• If you want to change to a function other than the

tuner when the

EON

indicator is flashing, press

EON

to turn EON off.

Clearing all stations from the RDS and EON
searches

The receiver will automatically register an identifying
marker (called a PI code) for any station you input into
the memory classes which can receive RDS or EON data.
If you want to remove the currently memorized stations
from RDS and EON searches, you can do it by erasing the
PI codes.

Press and hold EON for about two seconds.

ERASE PI

is displayed.

Press ENTER.

ERASE PI

flashes for two seconds to indicate the PI codes

have been erased.

STANDBY/ON

MULTI JOG

LISTENING MODE

SELECT

ENTER