−
15
−
English
2 Rear Camera Connection
Rear Camera Cable
Cigarette lighter
Rear Camera
Reverse light +12 В
CAUTION
• These illustrations are for illustration purposes only. The actual connection method is determined by
the design of your vehicle.
• Install the rear camera following the instructions above.
• Be careful not to damage the camera.
• We strongly recommend that you entrust this job to a professional
• Ensure the reverse light of your vehicle is + 12V, as some modern vehicles are equipped with LED
rear lights.
3 Connect the cigarette lighter power cable to the vehicle accessory socket.
Route the power cable to the passenger seat side. Fully insert this into the vehicle accessory socket
to make a good connection. (The location of the accessory socket will differ depending on the
vehicle.)
'IIKYYUX_YUIQKZ
)OMGXKZZKROMNZKX
VU]KXIGHRK
CAUTION
• The accessory socket will be extremely hot immediately after using the cigarette lighter. The tip of the
cigarette lighter power cable may melt or short circuit if it is plugged in while the socket is hot. Wait
for the socket to cool before plugging in the cigarette lighter power cable.
4 Turn the vehicle engine on to display the recording screen.
Note
A protective film is applied to the lens when the product is purchased. Peel off this film.
5 Removing this product
1
Unhook the mounting brackets from the main unit.
2
Remove this product.
