17
En
Adjusting the Sound Quality
By pressing BASS, TREBLE, etc. on the
remote controller during play, you can
adjust frequently used settings, such as the
sound quality.
0
BALANCE adjustments can only be
made with the buttons on the main unit.
∫
BASS (a)
Enhance or moderate the bass range of the
speakers.
Select between
j
5 and
i
5 in 1 dB
increments. (default value: 0)
0
It cannot be set if the DIRECT mode is
selected.
∫
TREBLE (b)
Enhance or moderate the treble range of
the speakers.
Select between
j
5 and
i
5 in 1 dB
increments. (default value: 0)
0
It cannot be set if the DIRECT mode is
selected.
∫
DIRECT (c)
Switch to the DIRECT mode which outputs
pure sound as it was intended by
bypassing the tone control circuits during
play.
∫
TONE (d)
Switch to the TONE mode which enables
BASS and TREBLE.
∫
P.BASS
P.BASS is enabled which emphasizes the
bass. Repeatedly press TONE (d) to
display "P.BASS", then press the Left/Right
cursors to switch On or Off. (Default value:
Off)
∫
BALANCE (main unit only)
Adjust the balance of the sounds output
from the left and right speakers.
Select between L
i
10 and R
i
10 in 1 steps
increments. (default value: 0)
> Before Start
> Part Names
> Install
> Playback
Setup | Others
c
d
a
b
SN29403247_SX-10AE_En_1707XX.book 17 ページ ２０１７年７月１９日 水曜日 午後１時５９分
