Tuningin strongsignals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Use MULTI-CONTROL to select LOCAL.
The function name tag
LOCAL
is highlighted.
2 Press MULTI-CONTROL to turn local
seek tuning on.
Local seek sensitivity (e.g.,
Local 2
) appears in
the display.
#
To turn local seek tuning off, press
MULTI-CONTROL
again.
3 Push MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM:
Local 1
Local 2
Local 3
Local 4
AM:
Local 1
Local 2
The
Local 4
setting allows reception ofonly
the strongest stations, while lower settings let
you receive progressively weaker stations.
Storingthe strongest
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons
1
6
and
once stored there you can tune in to those fre-
quencies with the touch ofa button.
1 Use MULTI-CONTROL to select BSM.
The function name tag
BSM
is highlighted.
2 Press MULTI-CONTROL to turn BSM on.
Searching
begins to flash. While
Searching
is
flashing the six strongest broadcast frequen-
cies will be stored under preset tuning buttons
1
6
in the order oftheir signal strength. When
finished, the preset channel list appears.
#
To cancel the storage process, press
MULTI-CONTROL
.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
Note
Storing broadcast frequencies with BSM may re-
place broadcast frequencies you have saved
using buttons
1
6
.
Selectingstations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one ofthem to re-
ceive.
1 Turn MULTI-CONTROL to switch to the
preset channel list mode.
2 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
To store the currently received frequency in
memory, press and hold
MULTI-CONTROL
until
the selected preset number stops flashing.
#
To return to the frequency display, press
BAND/ESC
.
Tuner
En
16
Section
04
