Digital Signal Processor
Introduction of DSP adjustments
1
You can use this unit to control multi-channel
processor (DEQ-P8000), which is sold sepa-
rately.
1
DSP display
Shows the DSP function names.
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1
Setting the speaker setting
2
Using the position selector
3
Auto TA and EQ (auto-time alignment and auto-
equalizing)
4
Adjusting the time alignment
5
Adjusting the speaker output levels using a
test tone
6
Selecting a cross-over frequency
7
Adjusting the speaker output levels
8
Adjusting 3-band parametric equalizer
1
Touch AV Menu and then touch
DSP Menu to display the DSP function
names.
The DSP function names are displayed and
operable ones are highlighted.
#
To go to the next group of function names,
touch
b
.
#
To return to the previous group of function
names, touch
a
.
#
When playing discs recorded with more than
96 kHz sampling frequency, you cannot use audio
functions. Also, equalizer curve setting,
Position
,
Auto EQ
and
Auto TA
will be canceled.
#
When playing discs recorded with more than
96 kHz sampling frequency, audio is outputted
from front speakers only.
#
When selecting FM as the source, you cannot
switch to
Source Level Adjuster
.
#
When playing other than the DVD disc, you
cannot switch to
Dynamic Range Control
.
#
When neither
Front-L
nor
Front-R
is selected
in
Position
, you cannot switch to
Time Alignment
.
#
When both the center speaker and the rear
speaker are set to OFF in the speaker setting, you
cannot switch to
Dolby Pro Logic II
.
2
Touch ESC to return to the ordinary dis-
play.
#
To return to the previous display, touch
Back
.
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1
Touch Position on the DSP function
menu.
2
Touch
c
/
d
/
a
/
b
to select a listening po-
sition.
Touch one of these,
c
/
d
/
a
/
b
, to select a lis-
tening position as listed in the table.
Key
Display
Position
c
Front-L
Front seat left
d
Front-R
Front seat right
a
Front
Front seats
b
All
All seats
#
To cancel the selected listening position,
touch the same key again.
Available accessories
En
82
Section
19
