1
Touch PIN Code Input on the initial
menu.
PIN code input display appears.
2
Touch 0 to 9 to input the PIN code of
your Bluetooth audio player.
#
To cancel the inputted numbers, touch
C
.
3
After inputting PIN code (up to 16 di-
gits), touch
.
The PIN code you entered is stored in this sys-
tem.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to
Low
. Normally, leave the set-
ting at
High
to ensure quality sound.
!
Only when the multi-channel processor
(DEQ-P8000) is connected to this unit, you
can operate this function.
%
Touch Digital ATT on the initial menu to
switch the digital attenuator setting.
Touch
Digital ATT
repeatedly until the desired
setting appears in the display.
!
High
–
High quality sound
!
Low
–
Minimize distortion sound
Auto TA and EQ (auto-time
alignment and auto-
equalizing)
The auto-time alignment is automatically ad-
justed for the distance between each speaker
and the listening position.
The auto-equalizer automatically measures
the car interior acoustic characteristics, and
then creates the auto-equalizer curve based
on that information.
!
Only when the multi-channel processor
(DEQ-P8000) is connected to this unit, you
can operate this function.
Please see the following section for Auto TA
and EQ operation. Refer to
Auto TA and EQ
(auto-time alignment and auto-equalizing)
on
page 90
Resetting the audio functions
You can reset all audio functions except vo-
lume.
!
Only when the multi-channel processor
(DEQ-P8000) is connected to this unit, you
can operate this function.
1
Touch Audio Reset on the initial menu.
2
Touch Reset.
3
Touch Reset again to reset audio func-
tions.
#
To cancel resetting the audio functions, touch
Cancel
.
Initial Settings
En
51
Section
15
Initial
Settings
