FUNCTION
button and
AUDIO
button
You can also select the desired mode by
FUNCTION
button and
AUDIO
button on the
remote control. But operation of
FUNCTION
button and
AUDIO
button on the remote con-
trol differs from the operation of
MULTI-CONTROL
on the head unit. When op-
erating the remote control, switch through the
modes as described below to select the mode.
FUNCTION
button operation
%
Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press
FUNCTION
repeatedly to switch be-
tween the following modes:
Play mode
(repeat play)
—
Random mode
(random play)
—
Scan mode
(scan play)
—
Pause
(pause)
—
Search mode
(search meth-
od)
—
TitleInput "A"
(disc title input)
Note
Refer to
Introduction of advanced built-in CD
player operation
on page 21.
AUDIO
button operation
%
Press AUDIO to select the desired
mode.
Press
AUDIO
repeatedly to switch between
the following modes:
Standard mode
F/B
(balance adjustment)
—
POSI
(position se-
lector)
—
TA1
(time alignment setting)
—
TA2
(time alignment adjusting)
—
LOUD
(loudness)
—
EQ 1
(graphic equalizer)
—
EQ 2
(16-band
graphic equalizer)
—
SW 1
(subwoofer on/off)
—
SW 2
(subwoofer cut-off frequency)
—
SW 3
(subwoofer slope)
—
F.HPF 1
(front high pass
filter slope)
—
F.HPF 2
(front high pass filter
cut-off frequency)
—
R.HPF 1
(rear high pass fil-
ter slope)
—
R.HPF 2
(rear high pass filter cut-
off frequency)
—
BBE
(BBE)
—
BMX
(BMX and
compression)
—
A.EQ
(auto-equalizer on/off)
—
SLA
(source level adjustment)
Note
Refer to
Introduction of audio adjustments
on
page 56.
Before You Start
En
12
Section
01