Adjusting the brightness
You can adjust the display brightness. Initially
this mode is set to 12.
1
Use MULTI-CONTROL to select
Brightness.
Brightness
appears in the display.
2
Push MULTI-CONTROL left or right to
adjust the brightness level.
Each time
MULTI-CONTROL
is pushed left or
right, brightness level increases or decreases.
00
to
15
is displayed as the level is increased
or decreased.
#
When dimmer is functioning, the brightness
level can be adjusted
00
to
10
.
Selecting the illumination
color
This unit is equipped with two illumination col-
ors, white and blue. You can select the desired
illumination color.
1
Use MULTI-CONTROL to select
Illumination.
Illumination
appears in the display.
2
Press MULTI-CONTROL to select the de-
sired illumination color.
Pressing
MULTI-CONTROL
repeatedly will
switch
Illumination
between white or blue
that status will be displayed (e.g.,
Blue
).
Correcting distorted sound
When listening to a CD or other source on
which the recording level is high, setting the
equalizer curve level to high may result in dis-
tortion. You can switch the digital attenuator
to low to reduce distortion.
!
Sound quality is better at the high setting
so this setting is usually used.
1
Use MULTI-CONTROL to select
Digital ATT.
Digital ATT
appears in the display.
2
Press MULTI-CONTROL to select the di-
gital attenuator level.
Pressing
MULTI-CONTROL
repeatedly will
switch between
High
(high) and
Low
(low)
and that status will be displayed.
Resetting the audio functions
You can reset all audio functions.
1
Use MULTI-CONTROL to select
Audio Reset.
Reset OK!
appears in the display.
2
Press MULTI-CONTROL.
Does it RESET?
appears in the display.
3
Push MULTI-CONTROL right.
Are you sure?
appears in the display.
4
Press MULTI-CONTROL to reset audio
functions.
Complete
appears in the display and audio
functions are reset.
#
To cancel this function on the way, press
BAND
.
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
!
The sound is muted or attenuated,
MUTE
or
ATT
are displayed and no audio adjust-
ment is possible.
Initial Settings
En
73
English
Section
14