Pioneer SC-LX701, Основное руководство

Страница: 73 / 116

37
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
■ EQ Adjust
You can adjust the output volume of the range of each speaker while listening to test
noises. You can adjust the volume of the different sound ranges for each of the speakers.
You can select up to four bands for the Subwoofer and nine bands for all other speakers.
If the overall volume balance changes by adjusting the volume of each frequency, you can
readjust the balance in "Trim".
Setting Item Default Value Setting Details
Front Left 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "
−
12.0 dB"
and "
＋
12.0 dB" (in 0.5 dB intervals) with / .
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
•
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Center 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between " − 12.0 dB"
and " ＋ 12.0 dB" (in 0.5 dB intervals) with / .
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Setting Item Default Value Setting Details
Front Right 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between " − 12.0 dB"
and " ＋ 12.0 dB" (in 0.5 dB intervals) with / .
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Height 1 Left 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between " − 12.0 dB"
and " ＋ 12.0 dB" (in 0.5 dB intervals) with / .
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
•
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.