Pioneer S-HTD630 Скачать руководство пользователя страница 12

Страница: 12 / 96

Connecting up

• These speaker terminals can be under

HAZARDOUS VOLTAGE

. When you

connect or disconnect the speaker cables,
to prevent the risk of electric shock, do not
touch uninsulated parts before
disconnecting the power cord.

• Do not connect any of the supplied

speakers to any other amplifier. This may
result in malfunction or fire. This system is
designed for best performance when
connected to the supplied speakers. We do
not, therefore, recommend connecting and
using other speakers with this system.

Twist and pull off the protective shields

on each wire.

Connect to the speaker terminals on the

rear of the unit.

Match the colored wire with the color-coded
label (above the tabs), then insert the colored
wire into the red (

) tab and the other wire with

the black (

–

) tab.

Connect to the speaker terminals on the

rear of the speakers in the same way.

• Remove the supplied non-skid pads from

the paper, and stick four onto the base of
each satellite speaker (

HTD-645DV only

–

refer to the setup guide for more on this).
Actual speakers supplied may differ from
those shown.

Connect the

WIRELESS (IN) jack on the

transmitter to the WIRELESS (OUT) jack on
the rear panel of the receiver, using the
supplied RCA stereo cord.

The wireless speaker system can be used for
multichannel sound with your main setup, or
as a second stereo speaker system.

Connect the supplied AC adapter to the

DC IN inlet on the rear panel of the unit,
then plug into a power outlet.

• Do not use any AC adapter but the one

provided with this system.

ANTENNA

AM LOOP

ANTENNA

UNBAL

AUDIO

LINE 1

LINE 2

OUT

COAXIAL IN

UND

WIRELESS

OUT

To power outlet

XV-HTD640

Transmitter

AC adaptor

XV-HTD640.book 12 ページ２００４年２月２５日　水曜日　午後４時１４分

Содержание S-HTD630

































































































Результаты поиска

Содержание S-HTD630

Отзывы:

Похожие инструкции для S-HTD630

Бренды по названию

Популярные бренды

Pioneer S-HTD630, Руководство по эксплуатации

Результаты поиска

Содержание S-HTD630

Отзывы:

Похожие инструкции для S-HTD630

Бренды по названию

Популярные бренды