4
En
3
Attach the non-slip pads to the base
of each of the center and surround
speakers.
Use the adhesive to attach 4 pads to the base of
each speaker.
4
Connect the speaker system.
Refer to the setup guide provided to connect the
speakers properly. After connecting the speaker
wires, thread the front speaker cord through
the outlet on the base of the speaker stand as
shown below. Make sure to use a stable
surface when doing this, and lay the speakers
flat on their side.
To keep the stand steady when upright, tuck the
cord into the groove on the bottom as shown below.
Refer to the setup guide provided for optimal
surround sound placement.
This is a standard multichannel surround soundspeaker
setup for optimal 5.1 channel home theatre sound.
1
2
Detach the surround speakers from the
front speakers.
To remove, turn the surround speaker so that the
arrow at its base lines up with the
DETACH POSITION
(
%
) on the top of the front speaker. Once aligned, the
surround speaker can be removed easily by gently
lifting it upwards.
Attach the front speaker covers and
surround speaker bases.
Line up the holes with the spurs on the cover or
base as shown below. Press in firmly.
Standard surround
5-spot setup
Front left
Surround
left
Listening position
Center
Subwoofer
Front right
Surround
right
Caution
To prevent accidents when in use, make sure the
surround speaker is secure by turning it so the
arrow
at the base of the speaker is not in the
UNLOCK AREA
.
1
2
