1
2
3
4
5
6
7
1
Power terminal
2
System remote control terminal
3
Terminal screws
4
GND terminal
5
Ground wire
6
System remote control wire
7
Battery wire
3
Put the wire ties in the slits and wrap
the wire ties around the wires.
1
1
Wire tie
#
Make sure the wires are connected and at-
tached properly before wrapping the wire ties
around the wires.
#
Wrap the wire tie around the wire insulation,
not the stripped wire.
#
Cut off any excess portions of the wire ties.
Connecting the speaker
output terminals
Use a wire of 12 AWG to 18 AWG wire for the
speaker wire.
1
Expose the end of the speaker wires
using nippers or a cutter by about 14 mm
to 16 mm.
1
1
14 mm to 16 mm
2
Connect the speaker wires to the
speaker output terminals.
Fix the speaker wires securely with the term-
inal screws.
1
2
3
1
Terminal screws
2
Speaker wires
3
Speaker output terminals
3
Put the wire ties in the slits and wrap
the wire ties around the wires.
1
1
Wire tie
#
Make sure the wires are connected and at-
tached properly before wrapping the wire ties
around the wires.
#
Wrap the wire tie around the wire insulation,
not the stripped wire.
#
Cut off any excess portions of the wire ties.
En
12
Section
03
Connecting the units
