Pioneer Remix station RMX-1000, Руководство по эксплуатации

Страница: 13 / 76

13
En
Using the X-PAD FX function
1 Press one of the [X-PAD FX] buttons.
One of this unit’s internal sound sources or one of the sampled sound
sources loaded from SD memory cards is selected and output. When a
button is pressed, the sound is produced immediately.
The pressed button lights.
!
Internal sound sources are preset at the [ KICK ], [ SNARE ], [ CLAP ]
and [
HI HAT
] buttons, respectively.
!
To select a sampled sound source stored on an SD memory card,
press the [
X-PAD FX
] button while pressing the [
BANK
] button.
2 Touch the [X-PAD].
This turns the effect on.
The effect changes according to the position on the [
X-PAD
] that is
touched.
! The effect turns off when you release your finger from the [
X-PAD
].
Sampling the currently playing sound
and using the X-PAD FX function
1 Press the [ROLL] button.
The [ ROLL ] button lights.
2 Touch the [X-PAD].
The sound at the time the [
X-PAD
] is touched is sampled and loop play-
back starts.
The number of beats sampled depends on the position on the [
X-PAD
]
that is touched.
1/8 1/4 1/2 1/1 2/1
!
The effect turns off when you release your finger from the [ X-PAD ].
Using the hold function
Press the [HOLD (MUTE)] button.
When the hold mode is turned on, the X-PAD FX effect applied directly
before your finger was released from the [
X-PAD ] is held.
! Press the [ HOLD (MUTE) ] button again to turn the hold mode off.
Using the BANK function
When one of the [
X-PAD FX
] buttons ([
KICK
], [
SNARE
], [
CLAP
] or
[ HI HAT ]) is pressed while pressing the [ BANK ] button, the [ BANK1 ],
[
BANK2
], [
BANK3
] or [
BANK4
] sampled sound sources are loaded
into the corresponding [ X-PAD FX ] button from the SD memory card
inserted into the SD memory card slot of this unit.
!
When loading sampled sound sources from SD memory cards into
the [
X-PAD FX
] section, first use remixbox to store the sampled
sound sources on the SD memory card. For details, see the remix-
box’s operating instructions.
1 Insert the SD memory card on which the sampled
sound sources are stored into the SD memory card slot
of this unit.
2 Press the [BANK] button to check which BANK can be
loaded.
When the [
BANK
] button is pressed, the [
BANK
] indicators flash for the
BANKs at which sampled sound sources can be loaded.
3 Press one of the [X-PAD FX] buttons ([KICK], [SNARE],
[CLAP] or [HI HAT]) while pressing the [BANK] button.
The sampled sound sources stored on the SD memory card are loaded
into [
SLOT1 ] to [ SLOT4 ] for the selected BANK.
[ KICK ]
button
[ SNARE ]
button
[ CLAP ]
button
[ HI HAT ]
button
[ BANK ] [ KICK ] button
BANK1
SLOT1 BANK1
SLOT2 BANK1
SLOT3 BANK1
SLOT4
[ BANK ] [ SNARE ]
button
BANK2
SLOT1 BANK2
SLOT2 BANK2
SLOT3 BANK2
SLOT4
[
BANK
] [
CLAP
]
button
BANK3
SLOT1 BANK3
SLOT2 BANK3
SLOT3 BANK3
SLOT4
[ BANK ] [ HI HAT ]
button
BANK4
SLOT1 BANK4
SLOT2 BANK4
SLOT3 BANK4
SLOT4
! The maximum number of sampled sound sources that can be loaded
is 4BANK x 4SLOT.
! The maximum length of the sampled sounds that can be set in the
BANK (the total for the 4SLOT) is 16 seconds.
! 48 kHz/24-bit or 48 kHz/16-bit WAV files are supported as sound
sources.
! When a lit [
X-PAD FX
] button is pressed while again pressing the
[ BANK ] button, this unit’s internal sound source is selected and
produced.
Using the OVERDUB function
Recording sounds and playing them
This function records four beats of the sounds stored at the [ X-PAD FX ]
buttons and plays the sounds in a loop.
1 Press the [OVERDUB (DELETE)] button.
The OVERDUB function turns on.
The standby mode is set until one of the [
X-PAD FX ] buttons is operated.
2 Press one of the [X-PAD FX] buttons.
When one of the [
X-PAD FX
] buttons is pressed, recording starts and a
4-beat loop starts playing.
! The sound of an [
X-PAD FX
] button can be added by pressing that
button during loop playback.
! When the [
OVERDUB (DELETE)
] button is pressed again, the
OVERDUB function turns off and playback and recording stop. The
recorded sound is deleted.
Muting recorded sounds
Press one of the [X-PAD FX] buttons while pressing the
[HOLD (MUTE)] button.
The sound of the [ X-PAD FX ] button that was pressed is muted from the
recorded sound.
! When the muted [ X-PAD FX ] button is pressed again while pressing
the [
HOLD (MUTE)
] button, the mute mode is canceled.
Deleting recorded sounds
Press one of the [X-PAD FX] buttons while pressing the
[OVERDUB (DELETE)] button.
The sound of the [ X-PAD FX ] button that was pressed is deleted from the
recorded sound.
! Deleted sounds cannot be retrieved.
English