Pioneer PDU-50WX2, Руководство по обслуживанию

Страница: 67 / 95

67
PDU-50WX2
3
RGB each color lowlight adjustment
Command
Red lowlight adjustment : PRL [Numeric data (3 byte, 000 - 999)]
Green lowlight adjustment : PGL [Numeric data (3 byte, 000 - 999)]
Blue lowlight adjustment : PBL [Numeric data (3 byte, 000 - 999)]
Operation after command reception
• Overwrite a lowlight adjustment value of mode (PT0 - PT3) during setting with numeric data.
• Transmit a command to the panel microcomputer.
< Command transmission rule of panel microcomputer >
fABC
f command A data : Red cutoff level, 000hex - 3FFhex
f command B data : Green cutoff level, 000hex - 3FFhex
f command C data : Blue cutoff level, 000hex - 3FFhex
However, adjustment value (ABC data) which is transmitted to the panel microcomputer is defined as follows by the setting mode.
At PT0 setting
: Adjustment value = Reference value
AT PT1 - PT3 setting : Adjustment value = Reference value + Offset value – 512 (reference value)
* Perform numeric data only until 999=3E7hex in the actual adjustment.
* Data except adjusting color transmit stored data.