65
PDU-50WX2
Electric Power Upper Limit Adjustment
Control
Panel microcomputer, EEPROM
Memory
Adjustment value, Mode setting
Adjust the upper limit of power consumption.
1
Mode setting of the electric power upper limit
Set to the reference mode
: AB0
Set to the offset mode (1/2/3) : AB1/AB2/AB3
• Write in the received mode into EEPROM.
• Read out the ABL adjustment value of received mode from the EEPROM.
• Transmit a command to the panel microcomputer.
2
Adjustment of the electric power upper limit
Command
: ABL [Numeric data (3 byte, 000 - 255)]
• Overwrite a ABL value of mode (AB0 - AB3) during setting with numeric data.
• Transmit a command to the panel microcomputer.
< Command transmission rule of panel microcomputer >
cA
c command A data : Electric power upper limit, 00hex - FFhex
However, adjustment value (A data) which is transmitted to the panel microcomputer is defined as follows by the setting mode.
At AB0 setting
: Adjustment value = Reference value
At AB1 - AB3 setting
: Adjustment value = Reference value + Offset value – 128 (reference value)
Содержание PDU-50WX2
Страница 23: ...PDU 50WX2 23 ...
Страница 78: ...PDU 50WX2 78 Block Diagram Pin Function ...