Pioneer PDR-F10 Скачать руководство пользователя страница 49

Страница: 49 / 82

PDR-F10

[Procedure]

1. Enter the Test mode.

2. Press the INPUT key so that "DIG/ANA" appears on the FL display.

3. Press the TV/LDP key so that "CD" appears on the FL display.

4. Move the pickup to the position where the power is easy to measure by pressing the SCAN key.

(

1 ¡

)

5. Press the SIDE A and SIDE B key in order, and light the LD.

6. Turn the CHAPTER key to adjust the power.

Switch the coarse adjustment and the fine adjustment by pressing the REC/REC MUTE key, and adjust it.

(initial state is the coarse adjustment.)

7. Press the PLAY key to register the adjustment if the power became the adjustment value.

When it is registered, shift to the CD-R Record Power Adjustment automatically.

6.5 LD POWER ADJUSTMENT

6.5.1 Playback Power Adjustment

Notes : Each test mode key uses remote control for service.

[Procedure]

1. Move the pickup to the position where the power is easy to measure by pressing the CHAPTER key.

(

4 ¢

)

2. Press the SIDE A and SIDE B key in order, and light the LD.

3. Turn the SCAN key to adjust the power.

Switch the coarse adjustment and the fine adjustment by pressing the SIDE A key, and adjust it.

(initial state is the coarse adjustment.)

4. Press the PLAY key to register the adjustment if the power became the adjustment value.

(assume the power when it was decided by A value)

When it is registered, shift to the Overdrive power adjustment automatically.

5. Turn the SCAN key to adjust the power.

Switch the coarse adjustment and the fine adjustment by pressing the SIDE A key, and adjust it.

(initial state is the coarse adjustment.)

6. Press the PLAY key to register the adjustment if the power became the adjustment value.

When it is registered, shift to the CD-RW Record Power Adjustment automatically.

6.5.2 CD-R Record Power Adjustment

0.9 mW

0.05 mW

Optimizing playback power of laser diode.

Incapable of disk discrimination, playback, or track searches. Or track jumping.

Pickup objective lens

Test Point

Adjustment Value

Symptom when Out of Adjustment

Purpose

Adjustment method

FL Indication

R REC : 4.3 mW

0.1 mW (= A value) ; R Over Drive : A value + 0.1mW

0.01 mW

Pickup objective lens

Optimizing CD-R recording power of laser diode.

Incapable of CD-R recording, self-pre recorded CD-R disk playback. Sound pauses,
track jumping, or bad RF wave shape (though no failure in playing CD).

Test Point

Adjustment Value

Purpose

Symptom when Out of Adjustment

Adjustment method

FL Indication

DANGER – LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.

Содержание PDR-F10



















































































Результаты поиска

Содержание PDR-F10

Отзывы:

Похожие инструкции для PDR-F10

Бренды по названию

Популярные бренды

Pioneer PDR-F10, Руководство по обслуживанию

Результаты поиска

Содержание PDR-F10

Отзывы:

Похожие инструкции для PDR-F10

Бренды по названию

Популярные бренды