Pioneer PDP-S33-LR XIN/UC, Руководство по эксплуатации

Страница: 2 / 19

English
2
CHECKING THE ACCESSORIES
7
Speaker cable x 2
Thank you for buying this Pioneer product.
Please read through these operating instructions before
using your speaker system so you will know how to make
the most of its performance. After you have finished reading
the instructions, put them away in a safe place for future
reference.
BEFORE USE
÷
The nominal impedance of this speaker system is 8 ohms.
÷
In order to prevent damage to the speaker system
resulting from input overload, please observe the
following precautions:
÷
Do not supply power to the speaker system in
excess of the maximum permissable input. This
can result in damage or a possible fire hazard.
÷
When connecting or disconnecting pin-plugs, be
sure that amplifier power is OFF.
÷
When using a graphic equalizer to emphasize loud
sounds of a high frequency range, do not use
excessive amplifier volume.
÷
Do not force a low-powered amplifier to produce a
loud volume of sound (the amplifier’s harmonic
distortion will be increased, and you may damage
the speaker).
÷
Please handle the speakers with sufficient care, as
the grille net and the cabinet can become damaged
or broken when they are subjected to strong external
impacts.
÷
Placing a CRT computer screen or CRT monitor near to
the speakers may result in interference or color distortion.
If this happens, distance the monitor from the speakers.
7
Operating Instructions
7
Speaker mounting fittings (Used when installing the
speakers
flush with the display)
Bracket for flush mounting (RIGHT) x 2
7
Speaker mounting fittings (Used when installing the
speakers
set back with the display)
7
Speakers mounting screws
(M5 x 10mm : Black) x 12
NOTE:
÷
Always use the accessory mounting fittings for
installation.
÷
When screws other than those enclosed as accessories
are used to install the speakers, the speakers may drop
off or accidents may be caused. Always use the screws
enclosed as accessories.
Installation
÷
Consult your dealer if you encounter any difficulties
with this installation.
÷
Pioneer is not liable for any damage resulting from
improper installation, improper use, modification, or
natural disasters.
Bracket for set back mounting (RIGHT) x 2
WARNING:
Handling the power cord on this product or cords
associated with accessories sold with the product will
expose you to lead, a chemical known to the State of
California and other governmental entities to cause cancer
and birth defects or other reproductive harm.
Wash hands after handling.
Bracket for flush mounting (LEFT) x 2
CAUTION:
÷
Attach the Plasma Display to the stand before installing
the speakers. See the Operating Instructions packed to-
gether with the stand for how to assemble the stand.
÷
Do not place force on the speakers’ front panel grille net,
or stick your finger or other object into the front of the
speaker, since you may damage the grille net or speaker
unit itself.
Bracket for set back mounting (LEFT) x 2
The customer can select whether to install the speakers flush
with the screen or set back slightly.
Flush
Set back
See the description below for details of the installation.
NOTE:
÷
If you install the speakers flush , you cannot use the
buttons on the right side of the display. Please use the
remote control.
SRD1281A_En_01_07 05.2.28, 2:49 PM 2