Pioneer PDP-5000EX, Руководство по обслуживанию

Страница: 110 / 204

PDP-5000EX
110
1 2 3 4
1 2 3 4
C
D
F
A
B
E
5
Actual Vofs adjustment (4)
Perform aging for 3 seconds with
RST MASK 01 (white) displayed.
Set to RST MASK 17 (blue 850).
Set VOL OFFSET to 252 (60 V).
Are there any dark cells?
Are there any dark cells?
Decrease Vofs data one volt by one
volt until dark cells disappears.
(VOL OFFSET must be 089 [28 V] or more.)
VOL OFFSET_max3 141(38[V]) ?
Display RST MASK 05 (black).
Check on the Factory menu to see if
each voltage setting is for the proper value.
Power OFF => ON
Mask OFF
Exit the Factory menu.
Set VOL OFFSET_max3 to 252 (60 V).
Note:
This setting value becomes the value
for VOL OFFSET_max3.
The settings are reset to the user setting.
The settings are reset to the initial values.
Use input signals from a DVD or PC for CA checking. Check that no bright cells or dark cells.
VOL OFFSET_max3
Re-replacement
of the panel required
or abnormality in
circuits
Yes
Yes
(Check VOL OFFSET_max3.)
No
No
(From
4
)
Set the lowest voltage among VOL OFFSET_max1
to _max3 as VOL OFFSET_max.
Vofs_max
Referring to the separate sheet,
determine the VOL OFFSET setting value.
Vofs setting
Yes
VOL OFFSET_max-min
96(19[V]) ?
No
Re-replacement
of the panel required
or abnormality in
circuits
Yes
No
Re-replacement
of the panel required
or abnormality in
circuits
CA check
MKS S51
MKS S55
MKS S00
FAN
POF,
PON
QAJ
MKS S67
VOF 252
VOF 252
VOF
∗∗∗
VOF
∗∗∗
• If a PC is connected, check the values by issuing the QAJ command.
Example: Values returned at the request of QAJ
QAJ1251300781361361281281283304D
This translates as follows:
125: Vsus = 205 V, 130: Vofs = 36 V, 078: Vyprst = 236 V