09
Basic Adjustment Settings
English
27
En
Setting up TV channels automatically
This section describes how to automatically search for and
set up TV channels.
Using Auto Installation
When the Plasma Display System is switched on for the first
time after purchase, the initial auto installation is initiated.
You can automatically set language, country and channels in
successive operations.
1
Select “Language” ( / ).
2
Select a language (
/
).
Auto Installation
Country
Installation
Language
English
Austria
Start
• You can select from among 12 languages; English,
German, French, Italian, Spanish, Dutch, Swedish,
Portuguese, Greek, Finnish, Russian, and Turkish.
3
Select “Country” ( / ).
4
Select the country ( / ).
5
Select “Installation” ( / then
ENTER
).
6
Select “Start” ( / then
ENTER
).
• Auto Installation automatically starts.
• To quit Auto Installation in progress, press
RETURN
.
7
After Auto Installation has been finished, press
HOME MENU
to exit the menu.
Setting up analogue TV channels manu-
ally
This section describes how to set up analogue TV channels
manually.
Using Manual Adjust
Use Manual Adjust to set up analogue TV channels manually.
1
Press
HOME MENU
.
2
Select “Setup” ( /
then
ENTER
).
3
Select “Analogue TV Setup” ( /
then
ENTER
).
• The password entry screen appears. Enter your 4-digit
password using buttons
0
–
9
.
4
Select “Manual Adjust” ( /
then
ENTER
).
5
Select “Programme Entry” ( / ).
6
Select a programme number (
/
).
• You can select 1 through 99.
Manual Adjust
Search
System
Programme Entry
41.75MHz
B/G
1
Manual Adjust
Search
System
Programme Entry
B/G
1
41.81MHz
7
Select “Search” ( / ).
8
Enter a frequency using buttons
0 – 9
and
ENTER
.
• You can also press
/
to enter a frequency.
• You can start Auto Installation from the Home menu after
moving to another country, for example. Perform the
following steps
1
to
3
before starting Auto Installation.
1
Press
HOME MENU
.
2
Select “Setup” ( /
then
ENTER
).
3
Select “Auto Installation” ( /
then
ENTER
).
• The password entry screen appears. Enter your 4-digit
password using buttons
0 – 9
.
• If no channel is found, check the antenna connections, and
then retry Auto Installation.
