13
Useful Features
English
97
En
Learning function of the remote
control unit
You can operate the connected AV products (AV Re-
ceiver, Cable Box, SAT tuner, VCR, DVD, DVD recorder,
LD) using the learning function of your remote control
unit. This remote control unit has a function that can
memorize each remote control code.
2 to 5 cm (0.8 to 2.0 inches)
Remote control
Remote control of
(Supplied accessory)
AV product
Presetting manufacture codes
1
Slide the
Mode switch
to match the device to
which you want to preset the remote control
signal.
2
Press
EDIT/LEARN
and
1
at the same time.
• The LED flashes.
3
Press
0
–
9
to enter the manufacture code. See
page 99.
• Preset mode is finished once the LED no longer
lights up.
• To exit the Edit mode halfway, press
EDIT/LEARN
again.
• If the
Mode switch
selection is changed when in the
Edit mode, the Edit mode is cancelled.
• If no operation is performed for more than one
minute, the Edit mode is cancelled.
• When you enter a code not listed, the LED flashes
quickly.
• If the table on page 99 does not include your desired
manufacturer or the remote control does not work,
you can make the memory learn its signal by the
Learn mode.
• The initial mode is “000” (PIONEER).
PDP5040HD-Eng (97-105)
7/24/03, 2:01 PM
97
