Pioneer PDP-434PU, Руководство по эксплуатации

Страница: 55 / 118

09 Basic Adjustment Settings
English
55
En
No Operation off
The system will be automatically placed into the
standby mode when no operation is performed for
three hours.
1
Press HOME MENU .
2
Press / to select “Power Control”, and then
press
ENTER .
3
Press / to select “No Operation off”, and then
press
ENTER .
4
Press / to select “Enable”, and then press
ENTER .
Item Description
Disable Does not place the system into the
(factory default) standby mode.
Enable Places the system into the standby mode if
no operation is performed for three hours.
5
Press HOME MENU to exit the menu.
• Five minutes before the system is placed into the
standby mode, a message appears every minute.
Power Control for PC source
Power Management
The system will be automatically placed into the
standby mode when no signal is received from the
personal computer.
1
Press HOME MENU .
2
Press / to select “Power Control”, and then
press
ENTER .
3
Press / to select “Power Management”, and
then press
ENTER .
4
Press / to select “Mode 1”or”Mode 2”, and
then press
ENTER .
Item Description
Off No power management
(factory default)
Mode 1 • Places the system into the standby mode
when no signal is received from the
personal computer for eight minutes.
• Even when you start using the computer
and a signal is received again, the system
stays off.
• The system is switched on again by
pressing STANDBY/ON on the Plasma
Display or TV
a
on the remote control
unit.
Mode 2 • Places the system into the standby mode
when no signal is received for eight
seconds.
• When you start using the computer and
a signal is received again, the system is
switched on.
• The system is switched on again by
pressing STANDBY/ON on the Plasma
Display or TV
a
on the remote control
unit.
5
Press HOME MENU to exit the menu.
PDP5040HD-Eng (40-55) 7/24/03, 1:59 PM 55