13
Useful Features
102
En
1
6
8
7
3
4
5
2
SAT control buttons
When the SAT is preset by the learning function of the
remote control, the remote control unit buttons will
function as shown below.
• When the
Mode switch
is set to CBL/SAT, satellite
broadcast tuners made by other manufacturers and
not preset can also be operated with the remote
control unit if
1
to
8
have learned the functions. See
page 97.
1
0 – 9
Press a button (or buttons) that corresponds to
the channel that you wish to watch.
2
CH
+
/
–
Press
CH
+
or
CH
–
to tune in a higher or lower
channel.
3
ENTER, / / /
ENTER
:
Press to activate the selected
function.
/ / / :
Press the button to select items on
the SAT GUIDE screen or SAT MENU
screen.
4
SAT INFO
When this button is pressed, information on
satellite broadcasting will appear.
• Use this button to learn if necessary.
5
SOURCE
a
Turns the Satellite broadcast tuner power on and
off.
6
CH ENTER
Fix the selected channel with the direct channel
selection buttons.
• Use this button to learn if necessary.
7
SAT MENU
When this button is pressed, the satellite
broadcasting menu screen will appear.
8
SAT GUIDE
When this button is pressed, the satellite
broadcasting guide screen will appear.
• CABLE and SAT cannot be selected at the same time.
• The color-highlighted buttons shown in the figure at
left can learn the control signal from another device’s
remote control.
Mode switch
(with “CBL/SAT”
selected)
PDP5040HD-Eng (97-105)
7/24/03, 2:01 PM
102
