12
Appendix
English
39
En
Problem
• No power.
• No picture or sound
• Normal picture but no sound
• No picture or black and white
picture
• Sound and picture interference
• Blurred or snowy picture, distorted
sound
• Remote control malfunctions
Troubleshooting
Possible Solution
• Make sure the Plasma Display is connected correctly. (See page 17.)
• Is the power cord disconnected? (See page 17.)
• Has the power been turned on? (See page 18.)
• Check if you have pressed on the remote control unit. (See page 18.)
If the
STANDBY
indicator on the Plasma Display lights up red, press .
• Check if the power cord is connected correctly.
• Check if you have pressed the on the remote control or the
STANDBY/ON
button on the bottom
of the Plasma Display.
• Select an input source responding to that particular source.
• Check the picture contrast and brightness settings.
• Check the volume.
• Check the volume.
• Check whether the
button on the remote control has been pressed.
• Adjust the colour settings.
• Check if the correct broadcast system is selected.
• Try to identify the electrical appliance that affects the Plasma Display, then move it further away.
• Plug the power cord of the Plasma Display into a different wall outlet.
• Check the direction, location and connections of your aerial. Such interference often occurs due to
the use of an indoor aerial.
• Press the
INPUT
button to select the Plasma Display or an external device.
• Replace the batteries in the remote control.
• Install batteries ensuring that the <+> and <–> ends of the batteries are inserted correctly.
• Check the angle and distance of the remote control to the Plasma Display. Make sure there are no
obstacles between the remote control and the Plasma Display.
• Check if the correct function button has been pressed.
• Change the location of light sources or the direction of the Plasma Display to avoid glare.
• Is the Teletext function activated? (See page 38)
12 Appendix
13-PDP42RXE-Eng (39-42)
9/30/05, 12:16 PM
39
Содержание PDP-42RXE
Страница 123: ......