2
En
Part Names and Functions
English
Before Proceeding
How to Use This Manual
This manual has been written to allow easy understanding
of setup and operating procedures when the video card
PDA-5002 is installed in the plasma display.
Remove the video card from its packaging and confirm
that all accessory parts are present. While installing and
setting up the video card, consult the section “Part
Names and Functions” on page 4 of this manual and in
the plasma display’s Operating Instructions to familiarize
yourself with the parts of the respective devices. Since
this manual makes frequent reference to the names of
operating buttons on the plasma display, use the display’s
Operating Instructions to familiarize yourself with the
controls on the display and the remote control unit.
The section “Installation and Connections” on page 6
includes information necessary for installing the video
card on the plasma display, together with instructions
regarding connections to various other components.
The section “Setting Up the System” starting on page 14
covers the necessary on-screen menu settings to
establish correct linkage between the plasma display and
connected components. Depending on the connections
made, this section may or not be necessary.
The remainder of the sections in this manual is dedicated
to the basic operations associated with selecting a source
component up to the more complex operations
associated with adjusting the plasma display picture to
match the requirements of specific components and
personal preferences.
About operations in this manual
Operations in this manual are outlined in step by step
numbered procedures. Most of the procedures are
written in reference to the remote control unit unless the
button or control is only present on the main unit.
However, if a button or control on the main unit has the
same or similar name as that on the remote control unit,
that button can be used when performing operations.
The following example is an actual operation that shows
how one might set the horizontal and vertical positions of
the screen. The screens shown at each step are provided
as a visual guide to confirm that the procedure is
proceeding as it should. Please familiarize yourself with
this process before continuing on with the rest of this
manual.
Note
The screen displays depicted in this manual represent typical
display examples.
The actual items and contents seen in screen displays may vary
depending on input source and specific settings.
Before Proceeding
Contents
Safety Precautions .................................. i
Before Proceeding .................................. 2
How to Use This Manual .............................................. 2
Checking Supplied Accessories ................................... 3
Part Names and Functions .................... 4
Connection Panel .......................................................... 4
Installation and Connections ................ 6
Installing the Video Card .............................................. 6
Input Connectors on the Plasma Display with
Video Card ..................................................................... 7
Connection to INPUT1 and INPUT2 ............................. 7
Connection to INPUT3 ................................................ 10
Connection to INPUT4 ................................................ 10
Connection to INPUT5 ................................................ 11
About DTV set Top Box Connection .......................... 11
Audio Connections ...................................................... 12
How to Route Cables ................................................... 13
Setting Up the System ........................ 14
Setup after Connection ............................................... 14
Operations ............................................ 16
Selecting an Input Source .......................................... 16
Screen Size Selection .................................................. 18
Partial Image Enlargement (POINT ZOOM) .............. 19
Automatic Power OFF ................................................. 20
Display Panel Adjustments ................. 21
Adjusting the Picture Quality ..................................... 21
Adjusting the Image Position and Clock
(Automatic Adjustment) ............................................. 22
Manual Adjustment of Screen Position and
Clock ............................................................................. 22
Other Operations ................................. 24
Rewriting the Input Display (INPUT LABEL) ............. 24
Changing the Color Temperature
(COLOR TEMP) ............................................................ 25
Reducing Video Noise (DIGITAL NR) ......................... 25
Setting the PureCinema Mode ................................... 26
Setting the Regional TV System Format ................... 26
Viewing a Fast Moving Picture
(3D Y/C MODE) ............................................................ 27
Viewing in a Bright Location
(HIGH CONTRAST) ...................................................... 28
AUTO FUNCTION ........................................................ 29
Audio Output (AUDIO OUT) ....................................... 30
Additional Information ........................ 31
Specifications .............................................................. 31
Supplement 1 .............................................................. 32
Supplement 2 .............................................................. 32
Supplement 3 .............................................................. 33
Explanation of Terms .................................................. 33
