Pioneer MVH-S405BT, Руководство пользователя

Страница: 25 / 196

25
X:\print\Pioneer\Fy18\??\ESGS\733ES(AC2)_QRD3523(B6_Horizon)\020Chapter_EN.fm
MVH-S405BT
733ES(AC2)_QRD3523(B6_Horizon)
En
En
g
lis
h
• Make sure that the unit is
installed securely in place. An
unstable installation may cause
skipping or other malfunctions.
3
Attach the trim ring.
Trim ring
When not using the supplied
mounting sleeve
1
Determine the appropriate
position where the holes on the
bracket and the side of the unit
match.
2
Tighten the screws on each side.
Truss screw (5 mm × 9 mm)
Mounting bracket
Dashboard or console
Removing the unit (installed
with the supplied mounting
sleeve)
1
Remove the trim ring.
Trim ring
• Releasing the front panel allows
easier access to the trim ring.
2
Insert the supplied extraction
keys into both sides of the unit
until they click into place.
3
Pull the unit out of the dashboard.
The microphone should be placed
directly in front of the driver at a
suitable distance to pick up their voice
clearly.
Installing the
microphone
CAUTION
It is extremely dangerous to allow the
microphone lead to become wound
around the steering column or shift
lever. Be sure to install the
microphone in such a way that it will
not obstruct driving. It is
recommended to use the clamps (sold
separately) to arrange the lead.
NOTE
Depending on the vehicle model, the
microphone cable length may be too
short when you mount the
microphone on the sun visor. In such
cases, install the microphone on the
steering column.
To install on the sun visor
1
Fit the microphone lead into the
groove.
2
Install the microphone clip on the
sun visor.
Lowering the sun visor reduces the
voice recognition rate.
To install on the steering
column
1
Slide the microphone base to
detach it from the microphone
clip.
Microphone
Microphone clip
Microphone base
2
Install the microphone on the rear
side of the steering column.
Microphone
lead
Groove
Microphone clip