Pioneer MVH-S329BT, Руководство пользователя

Страница: 21 / 28

21
En
En
g
lis
h
Power amp (sold separately)
Perform these connections when using
the optional amplifier.
System remote control
Connect to blue/white cable.
Power amp (sold separately)
Connect with RCA cables (sold
separately)
To front output
Front speaker
To rear output or subwoofer output
Rear speaker or subwoofer
Important
• Check all connections and systems
before final installation.
• Do not use unauthorized parts as this
may cause malfunctions.
• Consult your dealer if installation
requires drilling of holes or other
modifications to the vehicle.
• Do not install this unit where:
– it may interfere with operation of
the vehicle.
– it may cause injury to a passenger
as a result of a sudden stop.
• Install this unit away from hot places
such as near the heater outlet.
• Optimum performance
is obtained when the
unit is installed at an
angle of less than 60°.
• When installing, to ensure proper
heat dispersal when using this unit,
make sure you leave ample space
behind the rear panel and wrap any
loose cables so they are not blocking
the vents.
1
Determine the appropriate
position where the holes on the
bracket and the side of the unit
match.
2
Tighten the screws on each side.
Installation
Leave ample
space
5 cm
5 cm
Truss screw (5 mm × 9 mm)
Mounting bracket
Dashboard or console
The microphone should be placed
directly in front of the driver at a
suitable distance to pick up their voice
clearly.
CAUTION
It is extremely dangerous to allow the
microphone lead to become wound
around the steering column or shift
lever. Be sure to install the microphone
in such a way that it will not obstruct
driving. It is recommended to use the
clamps (sold separately) to arrange the
lead.
To install on the sun visor
1
Fit the microphone lead into the
groove.
2
Install the microphone clip on the
sun visor.
Lowering the sun visor reduces the
voice recognition rate.
To install on the steering
column
1
Detach the microphone base from
the microphone clip by sliding the
Installing the
microphone
Microphone lead
Groove
Microphone clip
Clamps
Use separately sold clamps to
secure the lead where
necessary inside the vehicle.