6
X:\print\Pioneer\ODM\127075007029(B6_Horizon)\020Chapter_EN.fm
MVH-29BT
127075007029(B6_Horizon)
En
The RDS (radio data system) function only works in areas that broadcast RDS
signals for FM stations.
1
Press
SRC
/
OFF
to select [RADIO].
2
Press
BAND
/
DIMMER
to select the band from [FM1], [FM2], [FM3],
[MW] or [LW].
3
Press a number button (
1
/
to
6
/
).
SP-P/O MODE
Select when there is a full-range speaker connected to
the rear speaker output leads and there is a subwoofer
connected to the RCA output.
[REAR/SUB.W]
[SUB.W/SUB.W]
Select when there is a passive subwoofer connected
directly to the rear speaker output leads and there is a
subwoofer connected to the RCA output.
[REAR/REAR]
Select when there are full-range speakers connected to
the rear speaker output leads and RCA output. If there is
a full-range speaker connected to the rear speaker
output leads, and the RCA output is not used, you may
select either [REAR/SUB.W] or [REAR/REAR].
DIM SETTING
Change the display brightness.
[SYNC CLOCK],
[MANUAL]
SYSTEM RESET
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
(Some of the settings may be retained even after
resetting the unit.)
[YES], [NO]
Radio
Receiving preset stations
Menu Item
Description
TIP
The
/
buttons can be also used to select a preset station when [SEEK] is set to
[PCH] in the FUNCTION settings (page 11).
The six strongest stations are stored on the number buttons (
1
/
to
6
/
).
1
After selecting the band, press the
M.C.
dial to display the main menu.
2
Turn the
M.C.
dial to select [FUNCTION], then press to confirm.
3
Turn the
M.C.
dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press
/
to select a station.
Press and hold
/
then release to seek an available station.
Scanning stops when the unit receives a station. To cancel seek tuning,
press /
.
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 11).
To store stations manually
1
While receiving the station you want to store, press and hold one of the
number buttons (
1
/
to
6
/
) until it stops flashing.
Disconnect headphones from the device before connecting it to the unit.
Best stations memory (BSM)
USB/AUX
Playing back
127075007029_artwork.book Page 6 Tuesday, May 24, 2016 7:48 PM
