Pioneer MJ-D508 Скачать руководство пользователя страница 50

Страница: 50 / 72

MJ-D508

Error Display

Can't REC

Can't COPY

Din Unlock

DAC Unlock

TOC Full

UTOC R ERR

UTOC ERR A

UTOC ERR L

Not Audio

Unkown Disc

Disc Full

Premastered

Protected

DETAILS OF ERROR DISPLAY

Details of Error

DEFECT occurred 10 times continuously during REC-PLAY.

Recordable cluster became 0 since DEFECT occurred during
REC-PLAY.

Address is unreadable. REC state can not be set for 20 seconds
even after try again.

Determined as follows according to the channel status of the
signals input from D-IN during REC-PAUSE or REC-PLAY.
1. Other than audio
2. Other than consumer use
3. Copy NG due to inversion of COPY bit of CD

The following occurred for digital signal input from D-IN during
REC-PAUSE, REC-PLAY
1. Digital IN PLL unlocked.
2. Locked at other than FS = 32, 44.1 and 48 kHz.

The following occurred for digital signal input from D-IN during
DAC mode
1. Digital IN PLL unlocked.
2. Locked at other than FS = 32, 44.1 and 48 kHz.

No area for registering music number and character information
during REC-PLAY (music name, disc number, etc.)

FTNO > LTNO.

FTNO

≠

0 or 1.

UTOC recorded on DISC could not be read.

Start address > End address.

Any one data of UTOC 0 to 4 has looped.

Data not for audio is recorded for TNO track mode currently
selected.

Data called MINI of system ID written in ASCII codes in TOC is
incorrect.

Disc type written in TOC is not pre-mastered MD, recording MD,
or hybrid MD.

TOC read was incorrect or could not be read properly.

Inserted a disc but could not bring in FOCUS.

No recordable space when attempted to set REC-PAUSE.

Disc only for playback was loaded when attempted to set REC-
PAUSE or edit.

Attempted to record or edit even through REC-proof knob of disc
for recording was in the REC-proof state.

Attempted to edit track with write-protect according to information
on UTOC.

Measure

Check if there are scratches, dusts, fingerprints, or black
spots on disc. Check if disc fluctuates eccentrically or
moves up and down largely.

Check if CD is copy-proof. (Example: CD-R, etc.)

Check if D-IN signal line is normal.

Check if D-IN signal is FS = 32, 44.1 and 48 kHz.

Check if D-IN signal line is normal.

Check if D-IN signal is FS = 32, 44.1 and 48 kHz.

Replace with recording/playback disc with space for
registering UTOC.

Replace with other discs to check if UTOC data is normal.

Select other TNO or replace with other discs.

Disc is outside specifications. Replace with different disc
and check.

The TOC data recorded on the disc do not comply with
MD Standards, so try using another disc.

The disc may be scratched or damaged, so try using
another disc.

Check if there are scratches, dusts, fingerprints, or black
spots on disc. Check if disc fluctuates eccentrically or
moves up and down largely.

Replace with different disc with recording space.

Disc is for playback only. Replace with disc for recording.

Track attempted to be edited is write-protected. Try again
with different track.

Restore the REC-proof knob and try again.

Содержание MJ-D508









































































Результаты поиска

Содержание MJ-D508

Отзывы:

Бренды по названию

Популярные бренды

Pioneer MJ-D508, Руководство по обслуживанию

Результаты поиска

Содержание MJ-D508

Отзывы:

Бренды по названию

Популярные бренды