
MJ-D707, MJ-17D
64
Error Display
NOT AUDIO
UNKNOWN
DISC
DISC FULL
PREMASTERED
PROTECTED
Can' t EDIT
TEMP OVER
DISC ERR
DISC ERR R
DISC ERR S
DISC ERR W
UNKNOWN
DISC
UTOC W ERR
UNKNOWN
DISC
MEMORY FULL
BLANK MD
DEFECT
UTOC W
ERROR
EEPROM
ERROR
MECHA
ERROR
[ ]
Details of Error
÷
Data not for audio is recorded for TNO track mode currently
selected.
÷
Data called MINI of system ID written in ASCII codes in TOC is
incorrect.
÷
Disc type written in TOC is not pre-mastered MD, recording MD,
or hybrid MD.
÷
No recordable space when attempted to set REC-PAUSE.
÷
Disc only for playback was loaded when attempted to set REC-
PAUSE or edit.
÷
Attempted to record or edit even through REC-proof knob of
disc for recording was in the REC-proof state.
÷
Attempted to edit track with write-protect according to information
on UTOC.
÷
Editing conditions were not satisfied for each editing function.
÷
Temperature inside unit (MD unit) was too high due to fault.
÷
Data read was incorrect or could not be read properly.
÷
Error occurred during music data recording and recording could
not be performed correctly.
÷
Music data READ search time exceeded
÷
REC PAUSE shift abnormality (search time exceeded)
÷
SD WRITE (search time exceeded)
÷
TOC read was incorrect or could not be read properly.
÷
Fault occurred during rewriting of UTOC rewriting, and rewriting
could not be performed correctly.
÷
Inserted a disc but could not bring in FOCUS.
÷
The DRAM has become filled with music data, but they can not
be written (to the disc).
÷
After reading UTOC, total number of TNO and NAME characters
was 0.
÷
Focus execution error, etc. occurred due to shock during REC-
PLAY.
÷
UTOC read was correct but could not be rewrite it.
÷
The EEPROM data are incorrect.
÷
Never completes EJECT.
÷
Never moves HEAD UP.
÷
Never moves HEAD DOWN.
÷
The set microcomputer and MD mechanism microcomputer
are not communicating properly.
Measure
÷
Select other TNO or replace with other discs.
÷
Disc is outside specifications. Replace with different disc
and check.
÷
Replace with different disc with recording space.
÷
Disc is for playback only. Replace with disc for recording.
÷
Track attempted to be edited is write-protected. Try again
with different track.
÷
Restore the REC-proof knob and try again.
÷
Operating method is wrong. Try again using correct
method.
÷
Check according to TROUBLESHOOTING.
÷
Faulty TOC or UTOC data or scratch on disc. Replaced
with other discs.
÷
The TOC data recorded on the disc do not comply with
MD Standards, so try using another disc.
÷
The disc may be scratched or damaged, so try using
another disc.
÷
Scratch on disc. Replaced with other discs.
÷
Check if there are scratches, dusts, fingerprints, or black
spots on disc. Check if disc fluctuates eccentrically or
moves up and down largely.
÷
Check if there are scratches, dusts, fingerprints, or black
spots on disc. Check if disc fluctuates eccentrically or
moves up and down largely.
÷
Record and check if disc is recordable.
÷
Check if there are scratches, dusts, fingerprints, or black
spots on disc. Check if disc fluctuates eccentrically or
moves up and down largely.
÷
Check to see if the recording head contact is correct or if
there are any disconnections between the board and the
recording head.
÷
Try doing a RESET operation again. If the problem still
persists, replace the EEPROM.
7.2.2 Details of Error Display