
MJ-D707, MJ-17D
63
1
2
Head Lifter
Lifter SP
Push
Part A
1
3
2
Head Lifter
Head Lifter
Servo Base
Part A
Push
Part B
Part B
Matching
Position
Error Display
Can't REC
Can't COPY
D-IN UNLOCK
TOC FULL
UTOC R ERROR
UTOC ERR A
UTOC ERR L
7.2.2 DETAILS OF ERROR DISPLAY
Details of Error
÷
DEFECT occurred 10 times continuously during REC-PLAY.
÷
Recordable cluster became 0 since DEFECT occurred during
REC-PLAY.
÷
Address is unreadable. REC state can not be set for 20 seconds
even after try again.
÷
Determined as follows according to the channel status of the
signals input from D-IN during REC-PAUSE or REC-PLAY.
1. Other than audio
2. Other than consumer use
3. Copy NG due to inversion of COPY bit of CD
÷
The following occurred for digital signal input from D-IN during
REC-PAUSE, REC-PLAY, or CD FUNC playback
1. Digital IN PLL unlocked.
2. Locked at other than FS = 32, 44.1 and 48 kHz.
÷
No area for registering music number and character information
during REC-PLAY (music name, disc number, etc.)
÷
FTNO > LTNO.
÷
FTNO
≠
0 or 1.
÷
UTOC recorded on DISC could not be read.
÷
Start address > End address.
÷
Any one data of UTOC 0 to 4 has looped.
Measure
÷
Check if there are scratches, dusts, fingerprints, or black
spots on disc. Check if disc fluctuates eccentrically or
moves up and down largely.
÷
Check if CD is copy-proof. (Example: CD-R, etc.)
÷
Check if D-IN signal line is normal.
÷
Replace with recording/playback disc with space for
registering UTOC.
÷
Replace with other discs to check if UTOC data is normal.
÷
Replace with other discs to check if UTOC data is normal.
÷
Replace with other discs to check if UTOC data is normal.
Removal of the Head Lifter
Head Lifter Installation
1
Remove the Lifter SP.
2
Tilt the Head Lifter to the rear and push part A to disengage it.
1
Install part A in the Servo Base with the Head Lifter tilted to the
back.
2
Match the Head Lifter and the Servo Base as shown in the figure,
and then engage part B.
3
While holding part B with your hand, tilt the Head Lifter to the
front and install the Lifter SP.