Pioneer Kuro Elite PRO-141FD, Руководство по обслуживанию

Страница: 79 / 238

79
PRO-141FD
5 6 7 8
5 6 7 8
A
B
C
D
E
F
[2] CONFIRMATION ON THE KURO LINK FUNCTION
When you use the KURO LINK (HDMI-CEC) function, if the unit does not function properly, such as not being able to control
or recognize connected equipment, check the following:
"
Confirmation of the manufacturer of the connected equipment
Check if the connected equipment was manufactured by Pioneer and if it supports the KURO LINK and HDMI Control of
the conventional product function.
If its manufacturer is not Pioneer, proper operations are not guaranteed.
"
Confirmation of connections
Check if the unit is connected properly, as shown in the figures below:
(For details, refer to "Making the KURO LINK connections" in the Operating instructions.)
Check that the following conditions are met:
• The connected equipment must support the KURO LINK and HDMI Control of the conventional product function.
• The equipment must be connected to the INPUT connector that has been selected in "Input Setting" on the KURO LINK
Setting
menu.
• The connections must be made properly, as shown in the above figures (in a case where an AV device, such as an AV
amplifier, and a DVD recorder/BD player are connected, in a case where only a DVD recorder/BD player is connected.)
• When an AV device that supports the KURO LINK function is connected, it must be connected between the PDP and a
DVD recorder/BD player.
• The KURO LINK function must be activated on the connected equipment (DVD recorder, BD player, AV device
[AV amplifier, etc.]). (Refer to the Operating instructions of the connected equipment.)
Example 1: When an AV amplifier that supports
KURO LINK is connected Example 2: When an AV amplifier
is not connected
Rear view
HDMI compliant
cable (HDMI cable
having the HDMI
mark)
BD player
AV amp
HDMI compliant cable
(HDMI cable having
the HDMI mark)
Rear view
BD player