Features
Features
█
General
–Fabricated with a rigid galvanized steel casing.
–Single skin galvanized steel casing with 10mm thickness,
25 kg/m3 high-density non-flammable PE insulation for the indoor unit.
█
Motor
–The single phase motor is consisted with hermetic aluminum alloy casing
and permanently lubricated ball bearing.
- The motor has class B insulation ; with internal thermal protection.
– Motor lead-out wires are with sleeve, providing protection against damage
– The 3 phase motor has Class F insulation, with IP55 protection index
█
Drain Pan
–The drain pan is 45~50mm depth with 1.0mm thickness galvanized steel
c/w internal epoxy polyester resin coating.
–The drain pan is sloped towards the drain pipe with a 2 deg. gradient.
–The drain pan has one 3/4-inch to 1-1/4-inch male pipe thread (BT) connection.
– The standard insulation material is 10mm thickness, 25kg /m density PE foam.
3
█
Flat type design which allows maximum utilization of storage and container loading.
Modular design allows minimum space for site installation.
█
All condensing units are supplied with scroll compressor, which is high in energy efficiency
and quiet in operation.
Product Nomenclature
1 2 3 4 5 6 7 8 9
K F D H 1 2 5 U W
Outdoor
1- 4 KFDH - Ducted Fan Coil Unit
KODH - Outdoor Unit
5-7 Nominal Capacity - MBH
8-9 Generation
150 - 150,000 Btu/hr
100 - 100,000 Btu/hr
200 - 200,000 Btu/hr
075 - 75,000 Btu/hr
125 - 125,000 Btu/hr
