64
En/ChH
Advanced Sound Settings
9
高級音聲設置
Adjusting channel volume levels
Depending on your room and where you’re sitting, you
may want to adjust the relative volumes of one or more
speakers for a more balanced sound. You can do this in
any mode, including the surround, DSP, and stereo
modes.
• Each DSP effect has its own set of channel level
settings.
• The channel levels you set for the surround mode
apply to all Advanced Theater effects.
• The headphone level is not affected by the channel
level settings.
1 Press CH LEVEL.
Adjustments to the channel volume levels will affect only
the current sound mode.
2 Use the
2
and
3
buttons to select a
channel to adjust.
Lch OdB
The display shows the channel and its current setting.
• Remember that not all channels are available in all
sound modes.
3 Use the
5
and
∞
buttons to adjust the
volume of the current channel.
Lch OdB
Lch + 3dB
For best results, sit in your main listening position when
doing this. You can adjust each speaker in the range of
+/-10dB.
4 When you're done, press ENTER.
• If you don’t press
ENTER
, channel level setting is
exited anyway after about 20 seconds.
調整聲道的音量級
您也許希望根據室內環境和聽音位置來調整一個
或多個揚聲器的相對音量,以獲得更加平衡的聲
音。您可以在任何模式下(包括環繞聲,
DSP
和立
體聲模式)進行此項操作。
÷
各種
DSP
效果對聲道都有各自的音量級設置。
÷
您為環繞聲模式設置的聲道音量適用於所有高
級影院效果。
÷
耳機的音量不受聲道音量級設置的影響。
1
按
CH LEVEL
。
對聲道音量進行的調整僅對當前的音聲模式有
效。
2
用
2
和
3
按鈕選擇要調整的聲道。
Lch OdB
顯示屏顯示該聲道及其當前設置。
÷
請記住並非所有聲道在所有的音聲模式下均有
效。
3
用
5
和
∞
按鈕調整當前聲道的音量。
Lch OdB
Lch + 3dB
為獲得最佳效果,作此調整時請坐在主聽音位
置。您可以在+/-10dB的範圍之內調整各揚聲器。
4
操作完成後,按
ENTER
。
÷
如果沒有按
ENTER
,則聲道音量級設置約在20
秒鐘後退出。
注意