Other connections
08
32
En
Chapter 8
Other connections
Connecting external antennas
For an external AM antenna, use 5 m (15 ft.) to
6 m (18 ft.) of vinyl-insulated wire and set up
either indoors or outdoors. Leave the loop
antenna connected. Use only the included AM
loop antenna.
For an external FM antenna, use a PAL
connector to hook up an external FM antenna.
Connecting auxiliary audio
components
Using the stereo analog inputs, you can
connect an external component such as a tape
deck or MD player for playback through this
system.
•
Connect the AUDIO IN jacks to the analog
outputs of an external playback component.
Connect using RCA pin-plug stereo cables.
Line Out options
The Line Out function allows you to determine
how sound from
LINE OUT
terminal is output.
1
•
Press LINE OUT to cycle through LINE ON
and LINE OFF options, then press ENTER to
confirm you selection.
•
LINE ON
– Multichannel sources are
downmixed to 2.1 ch (stereo). A 2 ch
downmix signal is produced from the
LINE
OUT
terminal.
•
LINE OFF
– For regular multichannel
playback through your speaker system.
Note that no signal is produced from the
LINE OUT
terminal.
Outdoor antenna
5 m to 6 m
(15 ft. to 18 ft.)
Indoor
antenna
(vinyl-coated
wire)
AM LOOP
ANTENNA
PAL connector
Note
1 • When the line out mode is on, most sound features cannot be used. The display will briefly blink
LINE ON
if you try and use a
prohibited function while the line out mode is on.
• The line out mode switches off if you change the input function (
DVD/CD
,
TUNER
, etc.) or switch the power off.
• This option is not effective when listening a source from
LINE
.
AUDIO
R
L
R
L
VIDEO OUT
VIDEO
Y
C
R
/
P
R
C
B
/
P
B
COMPONENT
VIDEO
S-VIDEO
OUT
LINE
IN
OUT
Ω
CONTRO
Tape deck, etc.
To audio
output
XV-DV-370.book 32 ページ ２００７年２月２日 金曜日 午後８時９分
