Getting started
04
47
En
English
Deutsch
Italiano
Español
Français
Nederlands
Again, try to be as quiet as possible while this
is happening. It may take 1 to 3 minutes.
9
The Auto MCACC Setup has finished! You
return to the System Setup menu.
• Be sure to disconnect the microphone
from this unit upon completion of the Auto
MCACC setup.
The settings made in the Auto MCACC Setup
should give you excellent surround sound from
your system, but it is also possible to adjust
these settings manually using the System
Setup menu (starting on page 66).
1
Other problems when using the Auto
MCACC Setup
If the room environment is not optimal for the
Auto MCACC Setup (too much background
noise, echo off the walls, obstacles blocking
the speakers from the microphone) the final
settings may be incorrect. Check for household
appliances (air conditioner, fridge, fan, etc.),
that may be affecting the environment and
switch them off if necessary. If there are any
instructions showing in the front panel display,
please follow them.
• Some older TVs may interfere with the
operation of the microphone. If this seems
to be happening, switch off the TV when
doing the Auto MCACC Setup.
Basic operation
Procedures for listening to audio from a radio
or connected other component.
1
Turn on the power of the playback
component.
2
Press
SYSTEM to turn on the power of
this system.
3
Select the source you want to playback.
Use the
MULTI CONTROL
(or
INPUT
SELECTOR
) buttons.
• Select the type of audio input signal if
required (see page 48).
4
Start playback of the component you
selected in step 1.
5
Select the listening mode.
Use the listening mode buttons.
6
Press MASTER /– to adjust the
volume.
Note
1 The subwoofer distance setting may be farther than the actual distance from the listening position. This setting
should be accurate (taking delay and room characteristics into account) and generally does not need to be changed.
1.Auto MCACC
Now Analyzing
Surround Analyzing
Speaker System
Speaker Distance
Channel Level
Acoustic Cal EQ
Return
SYSTEM
SYSTEM
TV CONTROL
CH
VOL
DIMMER SIGNAL SEL
BD MENU
INPUT
INPUT SELECT
SOURCE
TOP
MENU
HOME
MENU
RETURN
ST/MONO
DTV/TV
BASS
TRE
SETUP
PTY SEARCH
AUDIO
PARAMETER
iPod CTRL
MASTER
VOLUME
TOOLS
MENU
ENTER
MUTE
TUNER EDIT
HTP-700_VYXCN_En.book 47 ページ 2009年9月15日 火曜日 午前9時42分